VUpoint Bullet 4MP PoE Camera
Model: RVCM52P20
RISCO Group
Product Image
A white and black bullet-style IP camera is depicted. It features a prominent lens on the front, surrounded by IR illuminators. The camera body has the RISCO logo. A robust, adjustable mounting bracket is attached to the rear, designed for wall or ceiling installation.
Dimensions
Technical drawings illustrate the camera's dimensions. The main body measures 162.6 mm (6.4 inches) in length and has a diameter of 70.0 mm (2.75 inches). The circular mounting base has a diameter of 56.0 mm (2.2 inches) and features four mounting holes, each with a diameter of 4.5 mm (0.18 inches).
PoE Camera Settings
Note: This camera can be connected to RISCO Cloud only via the VUpoint NVR.
Step 1
Connect one end of the network cable (LAN) to the camera Ethernet port and the other side to your router or an NVR PoE Port. If the camera is not connected to PoE, power it up by an appropriate power supply.
Step 2
Use the VUpoint NVR instructions to connect the camera to the NVR using “RISCO Pro” Camera type.
Product Specification
| Parameter | Description |
|---|---|
| Image Sensor | 1/3" 4Megapixel progressive CMOS |
| IR Distance | 30 m |
| Focal Length | 2.8 mm |
| WDR | 120 dB |
| Firmware Upgrade | Via the camera's web interface |
| Power Supply | 12V DC/POE |
| Power Consumption | <5.0W |
| Operating Conditions | -40°C to 55°C (-40°F to 131°F)/ less than ≤ 95% |
| Storage Temperature | -40°C to 60°C (-40°F to 140°F) |
| Protection | IP67 |
