EU-Konformitätserklärung

Manufacturer Information

KEBA Energy Automation GmbH

Reindlstraße 51

4040 Linz

AUSTRIA

[CE Mark]

Document Details

Dokument-Nr.: 104952/CE/10

We hereby declare that the product(s) described below complies with the provisions of the following European Directive(s):

• EU-Richtlinie 2014/32/EU über die Bereitstellung von Messgeräten auf dem Markt
• EU-Richtlinie 2014/53/EU und deren Änderungen über die Bereitstellung von Funkanlagen auf dem Markt
• EU-Richtlinie 2011/65/EU und deren Änderungen zur Beschränkung der Verwendung bestimmter gefährlicher Stoffe in Elektro- und Elektronikgeräten

Product Information

Produktname: KC-P30 (KeContact-P30 Serie)

Varianten: Siehe Seite 4

Harmonized Standards (Directive 2014/32/EU)

The following applicable harmonized standard(s) were used for the presumption of conformity with Directive 2014/32/EU:

• EN 50470-1:2006
• EN 50470-3:2006

Notified Body Information

The notified body 0366 (VDE Prüf- und Zertifizierungsinstitut GmbH, Merianstrasse 28, 63069 Offenbach, Germany) has carried out the certification program for Module B "EU-BAUMUSTERPRÜFBESCHEINIGUNG" and Module D "KONFORMITÄT MIT DER BAUART AUF DER GRUNDLAGE EINER QUALITÄTSSICHERUNG BEZOGEN AUF DEN PRODUKTIONSPROZESS" and issued the following certificates:

• Bescheinigungs-Nr.: 40047821 (MODUL B)
• Bescheinigungs-Nr.: 40053333 (MODUL D)

Harmonized Standards (Directive 2014/53/EU)

The following applicable harmonized standard(s) were used for the presumption of conformity with Directive 2014/53/EU and its amendments:

• EN 300 328 V2.2.2 ¹⁾
• EN 300 330 V2.1.1 ²⁾
• EN 301 511 V12.5.1 ³⁾
• EN 301 908-1 V15.2.1 ³⁾
• EN 301 908-2 V13.1.1 ³⁾
• EN 301 908-13 V13.2.1 ³⁾
• EN 18031-1:2024 ⁴⁾

Article 3, (1), b) of Directive 2014/53/EU requires ensuring an adequate level of electromagnetic compatibility in accordance with Directive 2014/30/EU. This is demonstrated by compliance with the applicable parts of the following harmonized European standards:

• EN 61000-6-2:2005
• EN 61000-6-3:2007 + A1:2011
• EN 50470-1:2006
• EN 301 489-1 V1.9.2 ^{1) 2) 3)}

Additionally, the following international standard was considered for EMC:

• IEC 61851-21-2:2018

Article 3, (1), a) of Directive 2014/53/EU requires compliance with the objectives of 2014/35/EU regarding safety requirements. This is demonstrated by compliance with the applicable parts of the following harmonized European standards:

• EN IEC 61851-1:2019
• EN 61851-22:2002
• EN 61439-1:2011
• EN 62311:2008 ^{1) 2) 3)}
• EN 50364:2010 ²⁾

Harmonized Standards (Directive 2011/65/EU)

The following applicable harmonized standard(s) were used for the presumption of conformity with Directive 2011/65/EU and its amendments:

• EN IEC 63000:2018

Notes:

• ¹⁾ only applies to Option WLAN.
• ²⁾ only applies to Option RFID.
• ³⁾ only applies to Option GSM/UMTS/LTE.
• ⁴⁾ only applies to x-series variants.

Important Notes

The manufacturer bears sole responsibility for issuing this Declaration of Conformity.

In case of an alteration of the product not agreed upon with us, the product loses its presumption of conformity.

This declaration certifies conformity with the mentioned directive but does not assure any properties.

The safety instructions of the supplied product documentation must be observed and kept.

Frequency Bands and Maximum Transmit Power

Variants - Form Designation System

Example:

KC-P30 – ES 2 4 00 2 2 - M 0 0 - xx

I II III IV V VI VII VIII IX X XI XII

Declaration Details

Linz, 01.08.2025

Gerhard Weidinger

CTO