UniFi G5 Bullet Quick Installation Guide
Model: UVC-G5-Bullet
Mounting and Installation
This guide outlines the basic installation steps for the UniFi G5 Bullet camera.
Mounting Requirements
- Use M4 screws for mounting.
- Ensure a minimum clearance of 60cm (approximately 2 feet) around the mounting area.
- The mounting bracket features holes with diameters of Ø6mm (1/4 inch) and Ø18mm (11/16 inch).
Installation Steps
Follow these steps for physical installation:
-
Step 1: Prepare Mounting Location
Attach the mounting bracket to the desired surface using appropriate M4 screws. The bracket has specific hole placements for secure attachment.
-
Step 2: Connect Camera and Cable
Mount the UniFi G5 Bullet camera onto the bracket. Connect the Ethernet cable to the camera's port. The camera supports Power over Ethernet (PoE).
-
Step 3: Network Connectivity
Connect the Ethernet cable to a PoE-enabled switch or injector. Ensure the switch is connected to your network and the UniFi OS Console for management via UniFi Protect.
Network Diagram Description: The setup involves connecting the camera to a PoE-enabled switch, which then connects to the UniFi OS Console and the Internet.
Software and Support
To manage your UniFi G5 Bullet camera, download the UniFi Protect application:
- Download on the App Store
- GET IT ON Google Play
For assistance and answers to your questions, visit the support website:
For UI Support, please refer to the official Ubiquiti support channels.