Electrolux 600 Cordless Cleaner

About This Instruction Book

This manual provides essential information for the safe and effective use of your Electrolux 600 Cordless Cleaner. Please read it carefully before first use and keep it for future reference.

Model: 600 CORDLESS CLEANER

Part Number: A27940401

Internal Model Identifier: KSD-18W-265060HE

Also known as: EP61CB21WP

Included Accessories

The accessories included may vary depending on the specific model purchased. The following are common accessories and options:

The cleaner is suitable for both Carpet and Hard Floor surfaces.

Assembly and Charging

Charging the Battery

To charge the cleaner:

1. Attach the battery pack to the charging station.
2. Connect the charging cable to the station and a power outlet.

The battery indicator lights show the charge level:

• 4 solid lights: 100% charged
• 3 solid lights: 75-100% charged
• 2 solid lights: 50-75% charged
• 1 solid light: 25-50% charged
• Flashing light: 0-25% charged (requires charging)

A full charge typically takes 4.5 hours.

Wall Mounting the Charging Station

The charging station can be mounted on a wall for convenient storage and charging.

1. Choose a suitable wall location, approximately 55 cm from the floor.
2. Securely attach the charging station to the wall using the provided screws and wall plugs (ensure appropriate fixings for your wall type).
3. Place the cleaner onto the charging station.

Operating Your Cleaner

Connecting Attachments

The cleaner consists of a main unit, a tube, and various floor nozzles or accessories. Attachments connect with a "CLICK" sound.

1. Connect the tube to the main unit.
2. Attach the desired floor nozzle or accessory to the other end of the tube.
3. Ensure all connections are secure before use.

Control Panel and Operation

The control panel on the main unit displays operational status:

• Battery Level: Indicated by illuminated bars.
• Power Button: Press to turn the cleaner ON or OFF.
• Indicators: May include a warning triangle (⚠️) for potential issues or a water droplet (?) symbol, possibly related to wet cleaning functions or maintenance.

Maintenance and Cleaning

Emptying the Dustbin

Regularly empty the dustbin to maintain optimal suction power.

1. Release the dustbin from the main unit.
2. Open the dustbin and empty its contents into a trash receptacle.

Cleaning the Filter

The filter should be cleaned regularly to ensure efficient operation. Some filters are washable.

Washable Filter:

1. Remove the filter from the cleaner.
2. Wash the filter under lukewarm running water. If necessary, use a mild detergent.
3. Rinse thoroughly.
4. Allow the filter to air dry completely for at least 24 hours (24h+) before reinserting it. Do not use the cleaner without a dry filter.
5. Ensure the filter is not washed at temperatures above 40°C (Max 40°C).

Filter Replacement:

Some filters may require replacement after a certain period (e.g., 6 months or 12 months, indicated as 6M, 12M). Follow the instructions to remove and replace the filter.

Cleaning the Brush Roll

If the brush roll becomes tangled with hair or debris, it may need to be removed and cleaned.

1. Locate the release mechanism for the brush roll on the floor nozzle.
2. Release the brush roll and remove any tangled debris.
3. Reinsert the brush roll and ensure it is securely in place.

Troubleshooting and Warnings

The manual may contain specific troubleshooting tips and safety warnings. Always refer to the official documentation for detailed information.

General Warnings:

• Do not use the cleaner for wet cleaning unless specifically designed for it.
• Avoid vacuuming sharp objects, hot ashes, or liquids.
• Ensure the cleaner is switched off and unplugged before performing maintenance.

Electrolux Official Website

For more information, support, and to purchase accessories, please visit the official Electrolux website: www.shop.electrolux.com.