Enerdrive Dometic eSYS-E System Wiring Diagram
This document outlines the wiring configuration for the Enerdrive Dometic eSYS-E power management system.
System Components and Connections
The eSYS-E system integrates multiple power sources and distribution points. Key components include:
- Enerdrive DC200 Multi-Source Power Charger: Features inputs for Vehicle Positive/Negative and Solar Positive/Negative, and outputs for System Positive/Negative.
- Dometic ePOWER Charger (12V - 40A): A 3-bank multi-stage charger with AC Input and multiple output channels (CH1, CH2 N/A, CH3 N/A, NEG).
- Inverter System: Shown with 200A and 120A connections.
- Fuses: Various 1A fuses are used for circuit protection, including for 24hr circuits.
- Loads: The system distributes power to various loads.
- Battery: The primary power source, connected to the system.
Wiring Overview:
The diagram illustrates the flow of power from the battery through various charging and distribution components.
- The BATTERY is connected to the main system.
- The Enerdrive DC200 receives power from the VEHICLE INPUT and SOLAR INPUT, and its outputs are connected to the system's positive and negative terminals.
- The Dometic ePOWER Charger connects to the AC Input and distributes power through its channels.
- The Inverter System is connected with high-amperage links (200A, 120A).
- Circuit breakers labeled 60A, 50A, and 50A are shown, designated for DC200 Charger, AC Charger, and Loads respectively.
- A distribution block with terminals labeled +B1, +B2, +B3, and ALARM is part of the system, likely for battery monitoring or auxiliary functions.
- Multiple 1A fuses are strategically placed to protect individual circuits, including a set for '24hr Circuits'.
- The 'Loads' unit receives power distribution from the main system.
Diagrammatic Representation:
The wiring is depicted using colored lines representing electrical connections:
- Red lines typically indicate positive connections.
- Blue lines often indicate negative or control connections.
- Black lines are also used for negative connections.
Dimensions of the overall layout are indicated as 600.00 and 490.00.
Product Information
Brand: Dometic
Product Line: Enerdrive eSYS-E
Key Components: DC200 Multi-Source Power Charger, ePOWER Charger (12V-40A)
Functionality: The system is designed for multi-source power management, integrating vehicle, solar, and AC power for charging batteries and powering loads.
