IKEA VUKU Wardrobe

Important Safety Information

⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall using the provided tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

• Place heaviest items in the lower drawer.
• Do not set TVs or other heavy objects on top of this product.
• Never let children climb or hang on drawers, doors, or shelves.

This safety information is provided in multiple languages within the original document.

Parts Included

The following components are included for assembly:

• 4 x Long rods
• 4 x Medium rods
• 1 x Short rod
• 4 x Additional short rods
• 2 x Plastic dowel-like fasteners
• 2 x Bracket components

Assembly Steps

Follow these steps to assemble and secure your VUKU wardrobe. Ensure all parts are present before beginning.

Step 1: Prepare Brackets

Insert one plastic dowel-like fastener into each of the two bracket components. The dowel should fit snugly into the designated opening on the bracket. [➡️]

Step 2: Assemble Rod Frame (Part 1)

Take one assembled bracket component. Insert the ends of two rods (one long, one medium) into the corresponding holes on the bracket. Ensure the rods are fully seated. [➡️].

Take the second assembled bracket component and attach it to the other ends of the inserted rods, creating a basic frame. [➡️]

Step 3: Assemble Rod Frame (Part 2)

Continue connecting the remaining rods to the bracket components, following the illustrated pattern to form the frame. [Arrows showing multiple rod insertions].

The assembly of the rod structure involves multiple connections, ensuring all rods are securely attached to the brackets. [Close-up view showing secure connection].

Step 4: Attach Frame to Furniture

Position the assembled rod frame inside the wardrobe. Attach the frame to the furniture using the provided clips or fasteners. The diagrams show how the frame is integrated into the wardrobe's structure. [Arrows showing frame placement and securing].

Step 5: Internal Rod Placement

Insert the rods into specific points within the wardrobe's interior. The diagrams illustrate the precise locations and angles for rod insertion. [Arrows indicating rod insertion].

Step 6: Secure Internal Frame

Continue inserting and securing the rods to form the complete internal support system. This step involves bending or manipulating some rods to fit correctly and then securing them with additional fasteners or clips. [Diagrams showing rod bending and securing with clips].

Step 7: Final Frame Integration

Further integrate the assembled rod structure into the wardrobe, attaching it at specific points. [Arrows showing final rod connections].

Step 8: Complete Frame Assembly

Finalize the assembly of the internal rod structure by connecting any remaining rods and ensuring all connections are firm. [Diagrams showing final rod connections and securing].

Step 9: Internal Structure View

The assembled internal structure is now visible within the wardrobe, ready for wall attachment. [Illustration of the complete internal structure inside the wardrobe].

Step 10: Wall Attachment Preparation

Prepare to attach the furniture to the wall. The diagrams show the connection points for wall-mounting brackets.

Step 11: Secure Furniture to Wall

Attach the furniture to the wall using the provided tip-over restraints and screws. The diagrams show the bracket components being fixed to the wall and then connected to the furniture's internal structure. [Diagrams showing screws into wall/bracket and bracket connecting to furniture].