GW2000 Quick Start Guide
Getting Started: Power On and Connection
Follow these steps to power on and connect your GW2000 gateway:
- Power On: Ensure the device is powered on.
- Connect Phone: Connect your smartphone to the GW2000 Wi-Fi Access Point (AP) named 'GW2000X-XXXXXXXX'.
- Access Web Interface: Open a web browser and navigate to 192.168.4.1 to access the embedded web page.
- Alternative Connection: Alternatively, plug in an Ethernet cable to connect the gateway to your WiFi router. Find its assigned IP address via DHCP.
- Access Web Interface (DHCP): Open a web browser and enter the IP address obtained via DHCP to access the embedded web page.
Both connection methods lead to the Login screen. The first login does not require a password, but you can set one on the Device Setting page later. If a password is set, you will need to enter it for subsequent logins.
Setup Process
Complete the following steps to upload data to weather services:
- Upload Data: Begin by uploading data to your chosen weather services. Complete steps I through V.
- Router Setup: Connect to your local network.
- Device Setting: Configure device-specific settings.
- Set Timezone and Date: Set the correct timezone and date for accurate readings.
- Ecowitt Weather Service: Access the service at www.ecowitt.net.
- Register and Add Device: Register your Ecowitt Weather service account and add your device.
Note: After applying settings, verify that the IP address has been retrieved correctly.
If you select 'Auto Timezone' in the Device Setting, you must select the correct Timezone on the Ecowitt.net 'Add Device' page.
Important: Mark down the MAC address displayed; you will need it to add your device in step 3.
- Set Timezone and Date: Configure the device's time settings.
- Register Service and Add Device: Register your device with the Ecowitt Weather service or other supported platforms.
Additional Resources:
- Scan the QR code ? for the English, German, or Italian manual for detailed instructions and future reference.
- Access instruction manuals online at: https://www.ecowitt.com/support/download/178
Certifications: The device complies with FC, CE, and UKCA standards and is Made in China.
Attention: Ecowitt products and services are continuously updated. For the latest manuals and support, contact support@ecowitt.com or support.eu@ecowitt.net (EU/UK).
Manufacturer: ShenzhenShi OuSaiTeDianZi YouXianGongSi, located at C Dong 4 Ceng A, Minzhujiujiugongyecheng AQu, Xihuanlu, Shajingjiedao, Baoanqu Shenzhen, Guangdong 518101, CN.
Representatives:
- UK Representative: HUA TENG LIMITED, 3 Glass Street, Hanley, Stoke On Trent, ST1 2ET United Kingdom.
- EC Representative: AC WORKS CONSULTING SH, Via Vilfredo Pareto 125, 47521 Casena (FC), ITALY.
WS90 7-in-1 Weather Station
1. Compact and Built to last
The WS90 is a compact and robust 7-in-1 weather station designed for durability.
Key Components:
- Solar Panel: Provides power for the device.
- USB Port: For factory use only.
- NORTH Alignment Indicator: Helps with correct orientation.
- Haptic Rainfall Sensor: Measures rainfall with enhanced accuracy using anti-vibration technology.
- Light & UV Sensor: Detects ambient light and UV levels.
- LED Indicator: Provides status information.
- Heating power cable connector: For optional heating functionality.
- Ultrasonic Wind Speed Sensor: Measures wind speed without moving parts.
- AA LR6 Battery Compartment: Backup power source (batteries not included).
- Temperature & Humidity Sensor: Located internally to measure ambient conditions.
- Fixed Bolt: For mounting the station onto a pole with a 1-inch diameter.
2. Features
The WS90 offers a comprehensive suite of features:
- All-in-One Weather Station: Measures temperature, humidity, wind direction and speed, light, and UV levels.
- Near-Zero Maintenance: Designed with no moving parts for minimal upkeep.
- Dual-Power Supply: Operates on solar power with a backup battery for continuous operation.
- Haptic Rainfall Sensor: Delivers accurate rainfall measurements with an anti-vibration design.
- Live Data Access: View real-time weather data instantly via the Ecowitt app or the EcoWitt.net website.
- Alert Emails: Receive email notifications based on user-defined alert conditions.
- Sensor Support: Compatible with a wide range of existing and future sensors.
- Robust Design: Light, compact, and IPX5 rated for reliable outdoor performance.
- Third-Party Integration: Easily integrates with third-party systems using its unique data exchange protocol.
- Extended Range: Data can be received through the Hub GW2000 within a 150m (500ft) range.
3. Replaceable Temperature & Humidity Sensor
The Temperature & Humidity Sensor Kit is designed to be replaceable.
Replacement Procedure:
- Use a screwdriver to untighten the screws securing the sensor.
- Unplug the old sensor unit.
- Replace it with a new Temperature & Humidity sensor.
4. Paired with Wi-Fi Hub GW2000
Your private weather station collects data on temperature, humidity, wind direction and speed, light, UV levels, and rainfall. This data is then reported to you through the Ecowitt mobile application or the ecowitt.net website.
Supported Platforms:
- Ecowitt.net
- Weather underground
- Weathercloud
- Weawow Weather
- Your own defined server
The Ecowitt app is available on the Google Play Store and Apple App Store.
5. Specifications
Detailed specifications for the WS90 weather station:
| Measurement | Range | Accuracy | Resolution |
|---|---|---|---|
| Wind speed | 0~40m/s | <10m/s, +/-0.5m/s; ≥10m/s, +/-5% | 0.1M/S |
| Wind direction | 0~359° | <4m/s, TBA; ≥10m/s, ±10° | 1° |
| Temperature | -40~60°C | ±0.5°C | 0.1°C |
| Humidity | 1~99% | ±5% | 1% |
| Light | 0~300Klux | ±15% | 10Klux |
| UVI | 1~15 | ±2 | 1 |
| Rain | 0~9999 | ±10% | 0.1mm |
Power Consumption
- Anemometer sensor (main): Powered by an integrated 6.5V/4mA solar panel.
- Anemometer sensor (backup): Requires 2 x AA 1.5V batteries (not included). Lithium non-rechargeable batteries are recommended.
Ecowitt Weather
ECOWITT Welcome to Ecowitt!
