Instruction Manual: Handy Garden Roller

Specifications

The manufacturer reserves the right to change the product specification and livery according to continued product improvements.

Important Information

Intended Use

The device is intended for rolling soil, grass, or garden areas. It must not be filled with stones, glass, metal, bones, plastics, or material scraps. This product is not intended for commercial use. Generally acknowledged accident prevention regulations and enclosed safety instructions must be observed. Only perform work described in these instructions for use. Any other use is incorrect. The manufacturer will not assume responsibility for damage resulting from such use.

General Safety Instructions

It is important that you read and understand the owner's manual and labels affixed to the machine. Learn its application and limitations as well as the specific potential hazards. Retain these instructions for future reference. The operator is responsible for following the warnings & instructions in this manual and on the product.

Read & understand operator's manual before using the machine. Failure to follow instructions could result in death or serious injury.

• Risk of Slicing: Keep hands out of the way of all moving parts.
• Wear gloves to protect your hands.
• Wear foot protection.

Safety Alert Symbol: ? Used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury.

• [DANGER]: Indicates an imminently hazardous situation which, if not avoided, will result in serious injury.
• [WARNING]: Indicates a potentially hazardous situation which, if not avoided, could result in serious injury.
• [CAUTION]: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
• [CAUTION] (without safety alert symbol): Indicates a potentially hazardous situation which, if not avoided, may result in property damage.

Safe Operation Practices

• Stay Alert: Do not operate the machine while under the influence of drugs, alcohol, or any medication that could affect your ability to use it properly. Do not use this machine when you are tired or distracted. Be aware of your actions at all times. Use common sense.
• Avoid Dangerous Conditions: Ensure adequate surrounding workspace. Keep your work area clean and well-lit. Keep the area around the machine clear of obstructions, grease, oil, rubbish, and other debris.
• Inspect Your Machine: Check all bolts, nuts, and screws for tightness before each use, especially those securing guards and drive mechanisms. Vibration during use may cause these to loosen. Ensure all other tools/equipment are removed from the working area before using. Replace damaged, missing, or failed parts before using. Replace any missing or damaged warning labels.
• Dress Properly: Do not wear loose clothing, gloves, scarves, neckties, or jewelry (rings, wrist watches) which can be caught in moving parts. Protective electrically non-conductive gloves and non-skid heavy-duty footwear are highly recommended. Wear protective hair covering to contain long hair.
• Keep Bystanders and Children Away: Keep unauthorized persons away from the machine. If approached, stop the machine immediately. Do not allow children to handle or climb on the machine.
• Do Not Overreach: Keep proper footing and balance at all times. Never stand on the machine. Serious injury could occur if the machine is tipped or if moving parts are unintentionally contacted. Do not store anything above or near the machine where someone might stand on it to reach them.
• Avoid Injury from Unexpected Accident: Keep hands & feet out of the way of all moving parts. Do not place any part of your body or any tool in the machine during operation.
• Do Not Force Tool: Always work within the rated capacity. Do not use for a purpose for which it was not intended.
• Never Leave Machine Unattended: Do not leave the machine unattended until it has come to a complete stop.

Filling the Drum

• Water: When filling the drum with water, do not connect a hose pipe via a fixed coupling, which could cause a build-up of pressure within the drum. Always empty the roller drum after use to prevent rusting and protect from sub-zero temperatures. Anti-freeze can be used for further protection.
• Sand: When filling the drum with sand, it is recommended a large funnel is used to ease the filling method.

Machine Maintenance

• Clean the machine immediately after use. Keep the machine clean to ensure it operates to its full & safest performance.
• When maintaining this machine, only the manufacturer's original replacement parts should be used. The use of non-original manufacturer parts may invalidate your warranty.

Protect the Environment

• Take leftover materials to an authorized collection point or follow local stipulations. Do not discharge into drains, soil, or water.

Store Idle Equipment

• When not in use, the machine should be stored in a dry location. Keep the machine away from children and others not qualified to use it.

Components

Contents: Top Handle, Lower Handle, Scraper Bar, Drum, Fill/Drain Plug with Seal, Fixing Kit (Includes 6x Washer, 6x Bolt, 6x Nylon Nut, 2x E-Clip).

Assembly

This product requires assembly before use. Please check that all parts required for assembly are included. If any part is missing or damaged, please contact customer service.

1. Fit the Lower Handle to the Roller by placing one end of the Handle over the Roller Shaft. Then pull the other end of the Handle to place it over the other end of the Roller Shaft. You may need to bend the Handle slightly to stretch it over the Roller Shaft. Secure with the E-Clips and Washers supplied. The E-Clips will need to be squeezed onto the Roller Shaft using pliers.
2. Fit the Scraper to the Lower Handle using the supplied Bolts, Washers, and Nuts as shown. Ensure that the Scraper is just clear of the Roller before fully tightening the Nuts.
3. Fit the Upper Handle to the Lower Handle as shown using Bolts, Washers, and Nuts. The Handle may be folded for storage by slackening the nuts.
4. The Roller may be filled with water or sand by removing the Fill/Drain plug, filling with the required amount, and replacing the plug. If using water in the Roller, you may want to add anti-freeze during cold weather; however, the roller still needs to be drained before winter storage to avoid frost damage, even if anti-freeze has been used.

Operation

The product must only be put into operation if no defects are found. It is crucial that any defective parts are replaced before the product is used again. Check the safety equipment and the safe condition of the product:

• Check whether the drum is secure in its fixings.
• Check all parts to make sure that they fit tightly.
• Check whether there are any visible defects: broken parts, cracks, etc.

Never use the roller up and down slopes. Always work across a slope, ensuring you have a stable footing.

Cleaning

• Careful handling and regular cleaning ensure the device will remain functional and powerful for a long time.
• Brush off coarse dirt.
• Wipe down the device with a slightly damp cloth.

Storage & Transport

Storage

[WARNING] Make sure that unauthorized persons do not have access to the device!

• Store the machine in a dry place.
• Store away from direct sunlight.
• Do not store anything above or near the machine where anyone might stand on the machine to reach them.
• Keep the machine away from children and others not qualified to use it.

Transport

• Secure the device against slipping.
• When shipping, use the original packaging if possible.

Parts Diagram & List

Parts Diagram: The diagram visually represents the main components of the Garden Roller THGR (1938102001), showing the arrangement of the Top Handle, Lower Handle, Scraper Bar, Drum, Fill/Drain Plug, and Fixing Kit.

Note: Parts Lists are supplied for information purposes only; not all parts are stocked individually. We recommend you contact our Spares Team on 01793 333212 for expert advice.