WCT28M2701 WIFI+BT Module
IEEE 802.11 a/b/g/n/ac 2T/2R
Model Number: WCT28M2701
Product Description
The WCT28M2701 is a complete dual-band (2.4GHz and 5GHz) WIFI 2x2 MIMO module. This module provides a high level of integration with a dual-stream IEEE 802.11ac MAC/base band/radio and Bluetooth 5.1. The WLAN operation supports 20MHz, 40MHz, and 80MHz channels for data rates up to 866.7Mbps. It fully complies with IEEE 802.11 a/b/g/n/ac, offering feature-rich wireless connectivity at high standards, delivering reliable, cost-effective throughput from an extended distance.
Product Features
- Complies with IEEE 802.11b/g/n for 2.4GHz and IEEE 802.11a/n/ac 5GHz Wireless LAN.
- Bluetooth v5.1
- Two transmit and Two receive path (2T2R)
- Works with all existing network infrastructure.
- Capable of up to 128-Bit WEP Encryption.
- Freedom to roam while staying connected.
- Up to 866.7 Mbps High-Speed Transfer Rate in 802.11ac mode of operation.
- Operating Systems: Linux, Win7, Win8, Win10, XP
- Low power consumption.
- Easy to install and configure.
- High speed USB 2.0 interface
Product Specification
| Specification | Details |
|---|---|
| Model | WIF+BT Module |
| Product Name | WCT28M2701 |
| Standard | 802.11 a/b/g/n/ac |
| Interface | USB |
| Data Transfer Rate | 1, 2, 5.5, 6, 11, 12, 18, 22, 24, 30, 36, 48, 54, 60, 90, 120 and maximum of 866.7Mbps |
| Modulation Method | GFSK, π/4-DQPSK, 8DPSK (Bluetooth) DQPSK, DBPSK, CCK (802.11b) QPSK, BPSK, 16QAM, 64QAM with OFDM (802.11g) QPSK, BPSK, 16QAM, 64QAM with OFDM (802.11n) QPSK, BPSK, 16QAM, 64QAM with OFDM (802.11a) QPSK, BPSK, 16QAM, 64QAM, 256QAM with OFDM (802.11ac) |
| Frequency Band | BLUETOOTH: 2402~2480 MHz WIFI: 2.4G: 2412~2462 MHz 5G: 5150~5350MHz, 5470~5725MHz, 5725~5850MHz |
| Operation Mode | Infrastructure |
| Security | WEP, TKIP, AES, WPA, WPA2 |
| Operating Voltage | 3.3V ±10% |
| Current Consumption | <1000mA |
| Antenna Type | PIFA |
| Operating Temperature | 0 ~ 70°C ambient temperature |
| Storage Temperature | -40 ~ 80°C ambient temperature |
| Humidity | 5 to 95% maximum (non-condensing) |
Notices
- Keep product and accessories out of reach of children.
- Do not splash water or other liquid onto the product; this may cause damage.
- Do not place the product near heat sources or direct sunlight; this may cause deformation or malfunction.
- Keep the product away from flammable or naked flame.
- Do not repair the product yourself. Only qualified personnel can perform repairs.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
If the FCC identification number is not visible when the module is installed inside another device, the outside of the device must also display a label referring to the enclosed module. This exterior label can use wording such as: "Contains FCC ID:2AC23-WCT28" or similar wording.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and the body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The module is limited to OEM installation ONLY. The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install the module.
Canada Statement
This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
If the ISED certification number is not visible when the module is installed inside another device, the outside of the device must also display a label referring to the enclosed module. This exterior label can use wording such as: "Contains IC:12290A-WCT28" or similar wording.
Antenna Information
| Brand | Model | Type | Gain | Function |
|---|---|---|---|---|
| ZTX | WIFI PIFA Ant | PIFA | 2dBi for 2.4GHz Band 3dBi for 5GHz Band | WIFI |
| ZTX | BT PIFA Ant | PIFA | 2dBi | BT/BLE/BDR/EDR |
| HKC | WWXL6009190 | PIFA | 3.86dBi for 2.4GHz band 4.74dBi for 5GHz band | WIFI 2.4G / WIFI 5G |
| HKC | WWXL6009189 | Cooper Tube | 2.71dBi | BT BLE/BDR+EDR |
The antenna is permanently attached, can't be replaced.
Frequency Band Usage Notes
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate.
Frequency bands 5470-5600 MHz and 5650-5725 MHz: Until further notice, devices subject to this section shall not be capable of transmitting in the band 5600-5650 MHz. This restriction is for the protection of Environment Canada's weather radars operating in this band.
