CAME ZLJ24 Control Board
Original Spare Parts
Product Overview
The CAME ZLJ24 is an electronic control board designed for gate automation systems. It is compatible with various CAME gearmotors and accessories, offering features such as delayed action on opening and closing, and compatibility with safety devices like photocells and transponder sensors.
Key Features and Components
The control board features:
- Programming Function Display: A green LCD screen for programming and status indication.
- Control Board ZLJ24: The main electronic unit.
- Fuses: Includes fuses for line, motor 1, motor 2, and lock.
- Terminals: Clearly labeled terminals for connecting power supply, gearmotors, endstops, accessories, safety devices, and command buttons.
- Memory Roll Connector: For saving and loading configuration data.
- Safety Features: Supports photocell connections for enhanced safety during operation.
Electrical Connections
Detailed diagrams illustrate the electrical connections for various components:
Power Supply and Motors
- L-N: Power supply 230 V AC 50/60 Hz.
- Motor Connections: Terminals for 24 V DC gearmotors (e.g., FROG A24/A24E, F1024, F4024, AXO, F7024E) with delayed action on opening and closing.
- Endstop Connections: Terminals for endstop sensors.
Accessories and Commands
- 24 V DC Accessories: Terminals for powering accessories like cycle lamps and indicator lights.
- Electrolock: Connection for a 12 V - 15W electrolock.
- Safety Devices: Connections for photocells (DOC and DIR types) and transponder sensors (TSP00) or magnetic card readers (LT001) via the R700 coding board.
- Command Buttons: Terminals for stop buttons, opening/closing buttons, partial opening buttons, and keyswitches.
- Radio Receiver Output: Terminal B1-B2 for the second channel of a radio receiver.
- Antenna Connection: For radio control antenna.
Programming and Configuration
Restore Backup
The control board allows data to be saved to and loaded from a memory roll. To restore previous configurations:
- Insert the "Memory Roll" into the designated slot.
- Navigate the programming menu to "Restore backup".
- Confirm the action when prompted.
Note: If settings were not saved to the Memory Roll, all settings must be reconfigured as per the original manual.
Safety Tests
The control board performs automatic checks on the efficiency of safety devices like photocells. Any anomalies are indicated by a flashing LED on the control panel, and commands from remote controls or buttons are cancelled.
To enable the photocell safety test:
- Connect the transmitter and receiver as per the diagram.
- In the functions menu, select "safety tests" and choose the appropriate CX-CY-CZ input(s) to activate the test.
Disposal
This product and its packaging are made from recyclable materials. Please dispose of the product in accordance with local legislation. Some electronic components may contain polluting substances; do not litter.
Contact Information
For spare parts and assistance, CAME provides contact information for its branches worldwide. Please refer to the original manual or the CAME website for specific regional contact details.
