Technicolor Cable Modems and Gateways: Quick Start Guide
Before You Start
Carefully read the Safety Instructions and Regulatory Notices document included in your package before continuing with the installation of your cable modem or gateway.
Important
Before you connect your device, establish an Internet service account with your preferred Internet service provider. When establishing an account, your Internet service provider may ask you to provide information listed on the device label, such as the device serial number (S/N) or MAC address.
Connection Steps
-
1. Connect the Cable
Connect the RF coaxial cable from the wall outlet to the CABLE [Cable Connector (O)] on the back of the device.
-
2. Connect Ethernet
Connect your computer to the ETHERNET [Ethernet Port (+)] on the back of the device. If your device has more than one Ethernet port, you may connect additional computers or other networking devices to the extra Ethernet ports.
-
3. Connect Telephone (Optional)
If your device supports digital telephone service (VoIP), connect one end of a telephone cable to a telephone outlet in your home or to a telephone or fax machine. Connect the other end of the cable to the first TELEPHONE [Telephone Port (✔)] on the back of the device. The first port is labeled 1 or 1/2 depending on the device model.
-
4. Connect Power
Connect the barrel end [Power Adapter Connector ()] of the power adapter (included) to the POWER [Power Input (⊕/−−−+)] on the back of the device. Then, plug the adapter into a wall outlet. If your device has a power switch [Power Switch (/)] on the back of the device, make sure that the switch is in the ON position.
-
5. Wait for LEDs to Stabilize
Wait for the [Power LED (①/)], [Wireless LED (())], [DS LED (i/V)], [US LED (1/▲)], and [Online LED (/@)] on the front panel to stop blinking and remain on continuously. It may take up to 10 minutes for all LEDs to stop blinking.
Ready to Use
You are now ready to surf the Internet and use other networked devices.
Troubleshooting
Problems? If you encounter problems, make sure that all connections are secure. For further assistance, contact your service provider.







