Roger Technology BR21/353 Kit Product Technical Datasheet
Kit Product Technical Datasheet
SET BR21/353
This kit is designed for intensive use with brushless motors, featuring a native digital encoder and irreversible operation, ideal for swing gates with leaves up to 4.5 meters. The standard version includes a short 2m cable.
Brushless ?
Intensive use ⚙️
Digital Encoder ?
Composition SET BR21/353
| CODE | DESCRIPTION | QTY |
| BR21/351 | Electromechanical underground motor BRUSHLESS low voltage, super intensive use, with native encoder on-board, irreversible, ideal for swing gates with leaf up to 4.5 m. Standard version with short 2 m cable. | 2 |
| FU100 | Foundation box and lid in cold-galvanised steel. | 2 |
| RL650 | Release system for underground motor with standard lever. | 2 |
| KIT EDGE1/20 | Complete electronic kit with 36V EDGE1/BOX digital controller for 2 BRUSHLESS motors. With 2-channel radio receiver installed on board. | 1 |
Composition KIT EDGE1/20
| EDGE1/BOX | Digital control 36V for 2 BRUSHLESS motor, in plastic box. With 2-channel radio receiver installed on board. | 1 |
| SYNUS/2 | Dual code transmitter (modality fixed code or rolling code), 433,92 MHz, 2 channels, with copy function. | 2 |
| R90/F4ES | Pair of external photocells synchronized 24V AC/DC, up to a maximum of 4 pairs of photocells. | 1 |
| FIFTHY/24 | LED flashing light 24V with integrated antenna. | 1 |
| R99/C/001 | Signboard "Automatic Opening". | 1 |
PRODUCT TECHNICAL SPECIFICATIONS
| Power line supply | 230V AC - 50 Hz |
| Motor supply | 36V |
| Power rating | 200W |
| Frequency of use | Intensive use |
| Torque | 50 - 300 N m |
| Operating temperature | -20°C +55°C |
| Protection level | IP67 |
| Reductor Type | Irreversible |
| Manoeuvre speed | 1,2 Rpm |
| Opening time | 19-29 s |
| Limit switch | Mechanical stoppers |
| Recommended digital controllers | - |
| Encoder | Digital native encoder SENSORLESS 48 PPR |
| Maximum opening | 105° (optional 125° - 360°) |
| Power supply cable length | 2m |
| Bearing on main shaft | Standard |
| Operating cycles per day (opening/closing - 24 hours no stop) | 1300 |
| Maximum dimension product in mm (L x W x H) | 345 x 224 x 144 |
| Product weight packed (Kg) | 68,6 |
PRODUCT DIMENSIONS AND PREPARING FOR INSTALLATION
DIMENSIONS
A diagram shows the dimensions of the main motor unit. The main body is 414 mm in length, 166 mm in height, and 55 mm in width. There is a projection of 67 mm on one side and a base plate of 340 mm in length.
PREDISPOSITION FOR STANDARD INSTALLATION
A diagram illustrates the installation layout with key measurements. The main unit has a length of 1015 mm. A graph shows the relationship between weight (Kg) and distance (m), indicating a maximum weight of 1000 Kg at 0 meters, decreasing to 200 Kg at 5 meters.
PRODUCT ACCESSORIES
LT300: Levers group for opening up to 125°.
LT301: Levers group for opening up to 360°.
LT301/R: Levers group for opening up to 360°, with reinforced chain.
LT300/90SX: Levers group for opening up to 103° - 90° turned - left.
LT300/90DX: Levers group for opening up to 103° - 90° turned - right.
LT327/SC: Pinion gear 34 Z13 of adaptation in pinion combining 34 Z16.
RL650/R: Release system for underground motor with standard lever, reinforced steel version.
RL651: Release system for underground motor with european cylinder key (DIN).
RL663: Long release lever for underground motor.
