MELLTORP

Assembly Instructions

For increased stability, re-tighten the screws about two weeks after assembly. Make sure they stay tight by checking them a couple of times per year.

כדי להגביר את היציבות, חזקו את הברגים כשבועיים לאחר ההרכבה. בדקו את ההברגה כמה פעמים בשנה וחזקו לפי הצורך.

Assembly Steps

1. Attach the brackets to the tabletop using the provided bolts and hex key. Ensure the brackets are oriented correctly as shown in the diagram.

   [Diagram showing bracket attachment to tabletop]

2. Insert the legs into the brackets on the tabletop. Secure them using the provided bolts and wrench.

   [Diagram showing leg insertion and securing]

3. Repeat step 2 for all four legs.

   [Diagram showing all legs attached]

4. Turn the table upright. Ensure all connections are tight.

   [Diagram showing the assembled table]

5. Periodically check and re-tighten screws as needed for continued stability.

   [Icon indicating periodic tightening]