Mcombo Recliner TV Chair
Model: 6151-4999
Congratulations!
Mcombo Recliner TV Chair offers a classic design with excellent value and quality. Products are sourced directly from the factory, eliminating middlemen costs. This recliner provides a high-quality seating solution to enhance comfort and enjoyment.
Warranty Information
All warranties are valid for the original purchaser from MCOMBO ONLY ®.
- MCOMBO ® will replace defective parts or send replacement items if the warranty parts have not been subjected to misuse, abuse, or improper service, such as damaged wiring due to negligence or improper operation.
- All Mcombo recliners include a 30-day return/replace policy. During this period, Mcombo will cover shipping costs for returns and replacements of defective or damaged items by providing a pre-paid return label or arranging pick-up service for customer convenience.
Parts List
Please identify the following parts for assembly:
- A: 10 pcs Bolt M8 x 38
- B: 10 pcs Flat Washer 8*22*2
- C: 2 pcs Bolt M6 x 20
- D: 2 pcs Bolt M5 x 10
- E: 4 pcs Bolt M6 x 25
- F: 2 pcs Bolt M8 x 70
- G: 2 pcs Bolt M8 x 25
- H: 2 pcs M8 Bolt (as depicted in diagram)
- I: 1 pc Allen Wrench M6
- J: 1 pc Allen Wrench M8
- K: 1 pc Right Armrest
- L: 1 pc Left Armrest
- M: 1 pc Ottoman Leg Support
- N: 1 pc Ottoman Round Base
- O: 1 pc Ottoman Cushion
- P: 2 pcs Ottoman Bracket
- Q: 2 pcs Seat Leg Support
- R: 1 pc Seat Round Base
- S: 1 pc Seat Cushion
- T: 1 pc Back Cushion
- U: 1 pc Wrench
- V: 2 pc Washer
- W: 1 pc Lumbar Pillow
- X: 1 pc Remote Control
- Y: 1 pc Adapter
Assembly Instructions
Note: Please read instructions carefully before assembly and keep for future reference. ?
Step 1: Ottoman Assembly
Use Allen Wrench (#I) to attach the Ottoman leg supports (#M) to the Ottoman base (#N) using bolts (#A & #B). Install the bracket (#P) onto the Ottoman leg support (#M). Then, secure the Ottoman cushion (#O) to the Ottoman base using bolts (#C).
Step 2: Seat Base Assembly
Attach the seat leg support (#Q) to the seat base (#R) using bolts (#A & #B) through the pre-drilled holes. Secure the leg and base assembly with bolts (#A & #B), and tighten using the Allen Wrench (#I).
Step 3: Seat Cushion Installation
Install the seat cushion (#S) onto the chair frame. Align the adjusting levers on both sides of the cushion with the corresponding holes on the armrest frame of the chair. Tip: For easier installation, turn the chair frame and base upside down, then turn the seat cushion over and place it onto the chair frame.
Step 4: Armrest Frame Attachment
First, insert the washer (#V) between the adjusting lever and the armrest rod, and align them. Then, use screw (#D) to fix the armrest frame and the adjusting lever, tightening with wrench (#I).
Step 5: Back Cushion Attachment
Place the back cushion (#T) onto the seat cushion. Align the screw holes on the armrest frame with the screw holes on the side of the back cushion. Tighten the screws (#F) using wrench (#J).
Step 6: Backrest Securing
Align the small iron plate holes on the back of the backrest with the seat cushion. Secure using screws (#G & #H) with wrenches (#I & #U).
Step 7: Armrest Installation
Use screws (#E) to install the left armrest (#L) and right armrest (#K) to the armrest frame. Fix them in place using wrench (#I).
Step 8: Wire Connections
Connect the following wires:
- Adapter (#Y): Connect to the small black connector of the chair.
- Remote Control (#X): Connect two large black connectors.
- Vibrating Power Cord: Connect two small white connectors.
