Akko MU02 User Manual

Thank You

Thank you for purchasing and using the Akko MU02 product. To provide you with a better user experience, please read this manual carefully before using the product. Please keep it properly for future reference.

Packing List

The package typically includes:

• Akko MU02 Keyboard
• USB Cable [USB]
• 2.4G Wireless Receiver [2.4G]
• User Manual / Quick Start Guide

Diagram showing the layout of the Akko MU02 keyboard with keys labeled F1-F12, Esc, Tab, Caps Lock, Shift, Ctrl, Alt, Win, Fn, Spacebar, Arrow keys, and navigation keys.

System Requirements

Windows® XP / Vista / 7 / 8 / 10 or higher versions.

Connectivity Method

Connect the keyboard to your computer by plugging the USB cable into an available USB port to start using it.

LED Indicators

Connection Status

Battery/Mode Status

MU02 Combination Key Functions

The following functions can be accessed using the Fn key in combination with other keys:

MU02 System Functions (Windows)

Diagram showing the Windows keyboard layout with Fn, Win, and Ctrl keys highlighted.

Knob Function

The knob can be used to adjust volume or light brightness.

Diagram showing a rotary knob with '+' and '-' symbols, indicating volume/brightness adjustment.

Key Combinations

• Lock Windows Key: Press Fn + Left Win Key ?
• Restore Factory Settings: Long press Fn + `~` for 5 seconds
• Revert Ctrl into Menu Key: Long press Fn + Right Ctrl for 3 seconds

MU02 System Functions (Mac)

Diagram showing the Mac keyboard layout with Fn, Win, Alt, and Command keys highlighted.

MU02 Lighting Adjustment

Diagram showing the keyboard layout with Fn key combinations for lighting effects highlighted.

• Fn + -: Slower Animation
• Fn + =: Faster Animation
• Fn + ↑: Brighten ?
• Fn + ↓: Dim ?
• Fn + ←: Set animation direction to left
• Fn + →: Set animation direction to right
• Fn + Home: Cycle through Effects 1, 2, 3, 4, 5
• Fn + PgUp: Cycle through Effects 6, 7, 8, 9, 10
• Fn + End: Cycle through Effects 11, 12, 13, 14, 15
• Fn + PgDn: Cycle through Effects 16, 17, 18, 19, 20
• Fn + \: Set backlight color to 7 single colors with RGB loop effect
• Fn + L: Light Off/On ?

MU02 Connection Guide

Diagram showing the keyboard layout with indicators for Bluetooth Device 1, 2, 3, 2.4G Wireless Device, and Wired Mode.

The switch for connection modes is located under the CAPS key.

Bluetooth Pairing

After turning on the keyboard, press Fn + E/R/T to enter Bluetooth mode. Press and hold the Fn + E/R/T combination key for 3 seconds to put the keyboard in pairing mode, with the blue indicator light flashing quickly. Once the connection is established, the indicator light will stay on for 2 seconds. If the device fails to connect, the indicator light will turn off and the keyboard will enter sleep mode.

2.4G Pairing

After turning on the keyboard, press Fn + Y to enter 2.4G mode. Then press and hold the Fn + Y combination key for 3 seconds to enter pairing mode. Then insert the receiver, and the indicator light will flash quickly. Once pairing is successful, the LED indicator will stay on for 2 seconds. If no available device is found within 30 seconds, the LED indicator will turn off and the keyboard will enter sleep mode.

Battery Level Check

In wireless mode, press the Fn + Space combination keys to check the battery level.

• If the battery level is below 30%, the LED for number keys 1-2 will show a red light.
• If the battery level is between 30% and 100%, the LED for number keys 1-9 will show a green light.
• When the battery is fully charged, the LED for number keys 1-0 will show a green light.

Diagram showing number keys 1 through 0 with corresponding battery level descriptions: Less than 30% (Red light), Less than 40%, 50%, 60%, 70%, 80%, 90% (Green light), Fully charged (Green light).

Key/Lighting Effects Customization Instruction

1. The keys can be remapped and RGB can be programmed in the driver in any of the connection modes.
2. Keyboard lighting can be coordinated with the driver to achieve audio visualizer effects.
3. Please download the Akko Cloud driver from the Akko website. Users can download the driver via en.akkogear.com.

Akko Warranty and Service Statement

1. Akko provides a One-Year warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for specific warranty policy.
2. If the warranty window expires, customers need to pay for repairs. Akko will also provide instructions if users prefer to repair the keyboard themselves. However, users shall take full responsibility for any loss happened during self-repair.
3. Defects resulting from disassembly of the product, improper usage, and incorrect installation are not covered by warranty.
4. The return and warranty policy may vary in different platforms and are subject to the specific distributor at the time of purchase.

Company Information

Company: Shenzhen Yinchen Technology Co., Ltd

Address: 33 Langbi Rd, Bitou Community 1st Industrial Zone, Bao'an District, Shenzhen, China

Tel: 0755-23216420

Website: www.akkogear.com

Origin: Shenzhen, China

Social Media:

• Instagram: instagram.com/akkogear [Instagram]
• Facebook: facebook.com/akkogear [Facebook]
• TikTok: tiktok.com/@akkogear [TikTok]

Warning: ⚠️ Water and Beverages can't be poured into the Keyboard.

Certifications: CE, FC

Made in: China

Precautions

Man-made damage is not limited to immersion, falling off, and pulling off the wires with excessive forces, etc. As the keyboard is an electronic product, please handle it with care according to electronic product protection methods.