BYGD P Series DC to AC Power Inverter
Model: P series
Last Update: 10/23/2020
DECLARATION
Warning: This power inverter is not designed for use with hair dryers, power tools, heaters and other high power products. If used continuously do not exceed the rated power of the converter.
Declaration of conformity: BYGD declares that the P series model power inverter system is in compliance with Directive 2014/35/EU and applicable standards regarding exposure to electromagnetic fields. The manufacturer guarantees up to 18 months for the power inverter, excluding broken fuses, supply wires, and damages caused by extreme conditions or misuse. The guarantee is void if the fitting was not installed according to instructions, or if it has been repaired or modified. BYGD does not accept liability for damage caused as a result of misuse or incorrect application.
Disposal of your old product (WEEE): This product is covered by European Directive 2012/19/EU. Please find out about your local collection system for electrical and electronic products and dispose of it according to local rules, not with normal household waste. Correct disposal helps prevent negative consequences for the environment and human health.
SAFETY INSTRUCTIONS-PART B
Always consider all technical specifications and verify icons on the identification label and in Part A of your safety instructions.
Icon Explanations:
- 01 - For indoor installation only.
- 02 - WEEE 2012/19/EU symbol.
- 03 - Protection class II: double insulated, no earth connection required.
- 04 - Not suitable for use under dust and moisture.
- 05 - Ambient temperature: -10°C to 40°C.
- 06 - Not suitable for covering with thermally insulated material.
- 07 - A safety isolating transformer between primary and secondary circuits.
- 08 - Output wave type: modified sine wave.
- 09 - Power switch should be in the "OFF" position for cleaning. Do not use abrasives or solvents. Avoid liquid on electrical parts.
- 10 - Designed for general power inverter service (excluding explosive atmospheres).
PROTECTION FUNCTION
The inverter includes the following protection functions:
- Overload protection
- Over temperature protection
- Low voltage buzzer
- Low voltage protection
- Over voltage protection
- Short circuit protection
SPECIFICATION
| P800U | P1000U | P1200U | P1500U | |
|---|---|---|---|---|
| Input rated voltage | DC 12 V (limit: DC 11 V - 15 V) | |||
| Output rated voltage | AC 100 V / 110V / 220 V - 240 V | |||
| Output rated frequency | 50 Hz / 60 Hz | |||
| USB output | DC 5 V 2100 mA max | |||
| Output rated power | 800 W | 1000 W | 1200 W | 1500 W |
| Peak of surge power | 1600 W | 2000 W | 2400 W | 3000 W |
| Overload protection | Yes | |||
| Output wave type | Modified sine wave | |||
| Short circuit protection | Yes | |||
| Output rated efficiency | > 85% | |||
| No working input current | < 0.05 A max | |||
| Input low voltage alarm | 10.5 V (limit: ±0.3 V) | |||
| Input low voltage shut down | DC 9.5 V (limit: ±0.3 V) | |||
| Input over voltage shut down | DC 15.5 V (limit: ±0.5 V) | |||
| External fuse | 25 A x 4 | 30 A x 4 | 35 A x 4 | 40 A x 4 |
| Ambient temperature | -10 -40°C | |||
| Cooling method | Fan / Metal enclosure | |||
| Accessories | Battery clip cable, Leadwire | |||
DIMENSION
| Model | P800U | P1000U | P1200U | P1500U |
|---|---|---|---|---|
| L | 212 mm | 250 mm | 285 mm | 285 mm |
| W | 167 mm | 137 mm | 167 mm | 167 mm |
| H | 78 mm | 78 mm | 78 mm | 78 mm |
| Weight | 1.35 kg | 1.73 kg | 2.0 kg | 2.0 kg |
Top view: Shows the length (L) and width (W) of the inverter.
Side view: Shows the width (W) and height (H) of the inverter.
PRODUCT DISPLAY
The power inverter images are for reference only and do not represent the actual product. Please refer to the final product in the box.
- (1) AC output socket
- (2) Fan
- (3) USB port
- (4) Power light (green)
- (5) Power switch
- (6) Fault light (red)
- (7) Fan
- (8) "-" DC connect Terminal (black)
- (9) External fuse
- (10) "+" DC connect Terminal (red)
INSTALLATION
- Step 1: Ensure the power switch is OFF.
- Step 2: Connect the DC input terminals. Ensure the polarity is correct. Connect the black cable to the "-" terminal and the red cable to the "+" terminal. Torque specification: > 5 Nm.
- Step 3: Connect the cables to a 12V Battery.
- Step 4: Connect the cables to a 12V Battery. Ensure correct polarity: Red (+) to positive, Black (-) to negative.
- Step 5: Connect the AC output socket to your appliance.
- Step 6: Turn the power switch ON. The green power light should illuminate.
