Dimension Guide
Built-in Induction Hob / 80cm
Model: EIV644
width | height | depth | |
---|---|---|---|
Cut-out (mm) | 560 | 490 | |
Product (mm) | 590 | 44 | 520 |
Diagram showing the top view of the induction hob with cut-out dimensions. The hob has a radius of 5mm. The cut-out dimensions are indicated as 490+1mm (width) and 560+1mm (depth). Minimum clearance of 55mm is shown below the hob.
Diagram illustrating side and front views of the hob installation. Side view shows minimum clearances required from the countertop edge (min. 28 mm) and below the hob (min. 12 mm). Front view shows the hob installed in a countertop with a rangehood above. Minimum clearance between the hob and rangehood is 500mm, and minimum clearance from the front edge of the hob to the cabinet is 50mm.
Important Note: The clearance must meet or exceed the minimum recommended for both the rangehood and cooktop. Refer to the rangehood installation manual.
Please note! Dimensions to be used as a guide only. All customers MUST refer to the user manual supplied with the product for detailed installation instructions.
© 2021 Electrolux S.E.A PTE. LTD. E_DIM_EIV644_May21