Key Features
- Individually regulated 8 outputs DC Power Distributor for effect pedals
- 1 Ampère high current switch mode wallplug AC adaptor included
- 8 pcs DC cable set included (2 x short / 3 x mid / 3 x long)
- 2 x 6 - 12 V DC, 100 mA adjustable voltage output
- 6 x 9 V DC, 100 mA fixed voltage output
- Individual output status indicator LEDs
- Short protect / hum filter / common ground
- 3 blue LEDs for pedal board illumination
- Low input power indicator LED
- Dimension (L x W x H): 140 x 125 x 75 mm (box), 115 x 71 x 35 mm (unit)
Product Diagram and Indicators
The Artec Power Brick SPB-8 is a compact unit designed for powering effect pedals. The diagram illustrates its key components and connections:
- Input Power: The unit receives power via a DC 15V input, supplied by an included AC 100-240V, 50-60Hz switch-mode power adapter. The plug type can be US/EU/KR/UK.
- Input Power Indicator LEDs: These LEDs provide feedback on the input power status. They are labeled "GOOD" (bright when power is ok), "POOR" (blinking when power is low), and turn off when there is no power or very low power.
- Output Channels: There are eight DC output channels.
- Six channels are fixed at 9V DC, offering 100mA each, and are described as "Individually regulated and noise filtered".
- Two channels are adjustable from 6V to 12V DC, also providing 100mA each. These feature a voltage adjustment potentiometer, noted as useful for altering the tone of 9V analog effects by supplying lower voltages.
- Output Status Indicator LEDs: Each output channel (labeled A-H) has an indicator LED. These LEDs are bright when the channel is in standby, normal when the channel is active, and turn off when there is an overload or short circuit.
- Pedal Board Illumination: Three blue LEDs are integrated into the unit to illuminate the pedal board. A dedicated "Lighting on/off" switch controls these lights.
- DC Polarity: Prominent "CAUTION DC POLARITY" labels are present, indicating the standard center-negative configuration for the DC outputs.
- Included Cables: The package includes a set of DC to DC cables: two 200 mm (8"), three 300 mm (12"), and three 400 mm (16") cables.
- Dimensions: The unit measures 115 x 71 x 35 mm (unit) and 140 x 125 x 75 mm (box).
Safety and Handling Precautions
- Do not operate or store the unit in locations exposed to precipitation, high humidity, pollution, or strong vibrations. This unit is intended for indoor use only.
- Never attempt to dismantle or repair the unit yourself.
- Ensure that connected devices require a power supply voltage within the unit's capabilities. Do not connect devices that need a different voltage.
- Avoid using solvents like alcohol for cleaning the unit.
Disposal Information
- Ensure plastic bags and packaging are properly disposed of and kept away from children to prevent choking hazards.
- Do not dispose of packaging materials with regular household waste; ensure they are sent for recovery.
- At the end of its operating life, do not dispose of the device with normal household waste. It is subject to European directive 2002/96/EC and should be disposed of through an approved waste disposal firm or local waste facility.
- Dispose of batteries according to national or local regulations for hazardous waste.
Manufacturer and Distributor Information
Manufactured by Artec. Distributed by Thomann GmbH.
Thomann GmbH
Hans-Thomann-Str. 1
96138 Burgebrach
Germany
Website: www.thomann.de
Document ID: 108400_13.09.15
