Sony Voice Remote Control

Controlling Your TV

To Turn On TV: Press the Power key.

To Pair Remote: Press and hold the [VOL(-)] key and the [Google Assistant ?] key for 2 seconds to initiate pairing with the TV. All pairing transactions occur automatically without requiring manual setup.

Safety and Handling Instructions

Caution: Please read these safety instructions carefully to ensure personal safety and prevent property damage.

Warning:

• Do not put the remote in a fire.
• Do not disassemble the remote control.
• Dispose of the remote control properly.

Disposal of Old Electrical & Electronic Equipment: This symbol indicates that the product should not be disposed of with regular household waste. It applies in the European Union and other European countries with separate collection systems.

Batteries should not be exposed to excessive heat such as sunshine, fire, or the like.

Important Safety Instructions:

1. Read these instructions.
2. Keep these instructions for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
8. Only use attachments/accessories specified by the manufacturer.
9. Refer all servicing to qualified service personnel. Service is required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Specifications

Operating Temperature: -10 degrees to 40 degrees Celsius

Battery Type: 2 AAA batteries

Compliance with FCC Rules and Regulations

15.21: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

15.105(b): This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not used in accordance with the instructions, may cause harmful interference to radio communications.

If this equipment causes harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase or decrease the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced remote control/TV technician for help.

This equipment has been verified to comply with the limits for a Class B computing device, pursuant to FCC Rules. Changes and modifications made to the equipment without the manufacturer's approval could void the user's authority to operate this equipment.

FCC RF Radiation Exposure Statement: To comply with FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Authorization Label

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning Statement: Europe-EU Declaration of Conformity and Restrictions

SONY declares that this Voice Remote Control is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. This equipment is marked with the [CE symbol] and can be used throughout the European community. This indicates compliance with the RE Directive 2014/53/EU and meets relevant technical specifications, including:

• EN300328 v2.2.2: 2019
• EN301489-1 v2.2.3: 2019 / -17 v3.2.2: 2019 (draft)
• EN60065: 2014+A11:2017 / EN62368-1:2014+A11:2017
• EN62479: 2010 / EN50663: 2017
• EN55032: 2015+AC: 2016; EN55035: 2017/AC: 2019

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

Product Specification

Software: X1

Frequency: 2402 to 2480 MHz

Maximum power: 5.92dBm

Industry Canada Compliance

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be chosen such that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

RF exposure: To comply with Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

Other Compliance Information

Taiwan (TW): RMF-TX611T

The operation of this equipment is subject to the following two conditions:

1. This equipment or device may not cause harmful interference.
2. This equipment or device must accept any interference, including that which may cause its undesired operation.

This product is homologated by ANATEL, in accordance with regulated procedures by Resolution No. 242/2000 and meets the applied technical requirements. This equipment is not entitled to protection against harmful interference and cannot cause interference in duly authorized systems. For more information, consult the ANATEL website – www.anatel.gov.br.

Taiwan (NCC ID Logo): The NCC ID Logo marking position is indicated in the diagram (red area).

Internal component illustration: Shows the internal layout of the remote control, featuring two AAA battery compartments and the main circuit board.

Remote Control Visual Description

The Sony Voice Remote Control is a silver-colored device featuring a power button, a Google Assistant button (?), dedicated streaming service buttons for YouTube, Netflix, Disney+, and Prime Video, navigation controls, volume and channel up/down buttons, mute, and other function buttons.