Sony Voice Remote Control

Controlling Your TV

English Instructions:

1. Press the Power key to turn on the TV.
2. Press and hold the [VOL(-)] key and the [Google Assistant ?️] key for 2 seconds to initiate pairing with the TV.
3. All pairing transactions occur automatically in the background, and no manual setup is required.

(Instructions are also provided in Spanish and Portuguese in the original document.)

Safety and Handling Instructions

Caution: Please read these safety instructions carefully to ensure your personal safety and prevent property damage.

Warning:

• Do not put the remote control in a fire ?.
• Do not disassemble the remote control.
• Dispose of the remote control responsibly ♻️.

Batteries must not be exposed to excessive heat such as direct sunshine or fire.

Important Safety Instructions:

1. Read these instructions.
2. Keep these instructions for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water ?.
6. Clean only with a dry cloth ?.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
8. Only use attachments/accessories specified by the manufacturer.
9. Refer all servicing to qualified service personnel. Service is required when the apparatus has been damaged in any way, such as if liquid has been spilled or objects have fallen into it, if it has been exposed to rain or moisture, if it does not operate normally, or if it has been dropped.

Compliance Information

FCC Rules and Regulations

15.21: Users are cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

15.105(b): This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase or decrease the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced remote control/TV technician for help.

This equipment has been verified to comply with the limits for a Class B computing device, pursuant to FCC Rules. Users are cautioned that changes and modifications made to the equipment without the approval of the manufacturer could void the user's authority to operate this equipment.

FCC RF Radiation Exposure Statement: To comply with FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Authorization Label

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

European Union Declaration of Conformity

Warning Statement: SONY declares that this Voice Remote Control is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. This equipment is marked with the [CE symbol] and can be used throughout the European community. This indicates compliance with the RE Directive 2014/53/EU and meets the relevant parts of the following technical specifications:

• EN300328 v2.1.1: 2016
• EN301489-1 v2.1.1: 2016 (draft) / -17 v3.1.1: 2016 (draft)
• EN60065: 2014
• EN62479: 2010
• EN55032: 2012+AC: 2013; EN55024: 2010+A1:2015

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE ⚠️.

Industry Canada Compliance

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be chosen so that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

RF exposure: To comply with Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

Regulatory Statements (Spanish & Portuguese)

The original document also contains regulatory statements in Spanish and Portuguese, including conditions for operation and ANATEL homologation for Brazil. These are summarized here in English for conciseness.

Spanish Statement Summary: Operation is subject to two conditions: 1. The equipment or device may not cause harmful interference. 2. This equipment or device must accept any interference, including interference that may cause its undesired operation.

Portuguese Statement Summary: This product is homologated by ANATEL, in accordance with regulated procedures. It does not have the right to protection against harmful interference and cannot cause interference in duly authorized systems. For more information, consult the ANATEL website.