EU Declaration of Conformity
Apparatus/Equipment
Vacuum Cleaner
Product:
VFS1
Manufacturer or his authorized representative
Name: Dreame Trading (Tianjin) Co., Ltd.
Address: Room 2112-1-1, South District, Finance and Trade Center, No.6975 Yazhou Road, Dongjiang Bonded Port Area, Tianjin Pilot Free Trade Zone, China
Country: China
Manufacturers authorized EU Representative
Name: Dreamer Technology Netherlands B.V.
Address: Spicalaan 29, 2132JG Hoofddorp
Country: Netherlands
Telephone: +31 20 793 2050
Email: compliance.eu@dreame.tech
This declaration of conformity is issued under the sole responsibility of the manufacturer.
DE: Wir, Dreame, erklären hiermit in alleiniger Verantwortung, dass das/die unten genannte(n) Produkt(e) den folgenden Richtlinien und Standards entspricht /entsprechen.
GB: We, Dreame hereby declare under our sole responsibility, that below mentioned product(s) is/are in conformity with following directives and standards.
FR: Nous, Dreame, déclarons par la présente, sous notre seule responsabilité, que le ou les produits mentionnés ci-dessous sont conformes aux directives et normes énoncées ci-après.
IT: Noi, Dreame, con la presente dichiariamo, sotto la nostra esclusiva responsabilità, che il/i prodotto/i sotto menzionato/i è/sono conforme/i alle seguenti direttive e norme.
NL: Wij, van Dreame, verklaren onder onze eigen verantwoordelijkheid dat onderstaand vermelde product(en) in overeenstemming is/zijn met de volgende richtlijnen en normen.
ES: Nosotros, Dreame, por el presente documento declaramos bajo nuestra única responsabilidad, que el/los producto(s) mencionado(s) a continuación cumplen con las directivas y estándares siguientes.
| Directive/Standard | Designation | Compliance |
|---|---|---|
| Radio Equipment Directive (RED) | 2014/53/EU | ☑ |
| Low Voltage Directive (LVD) | 2014/35/EU | ☑ |
| Electromagnetic Compatibility Directive (EMCD) | 2014/30/EU | ☑ |
| Restriction of the use of certain hazardous substances (RoHS) | 2011/65/EU | ☑ |
| Ecodesign Requirements for energy-related products (ErP) | 2009/125/EC | ☑ |
| Machinery Directive (MD) | 2006/42/EC | ☑ |
Harmonized Standard
| EN 55014-1:2017+A11:2020 | EN 55014-1:2021 |
| EN 60335-1:2012/A15:2021 | EN IEC 55014-1:2021 |
| EN 60335-2-2:2010/A1:2013 | EN 61000-3-2:2014 |
| EN 60335-2-10:2003/A1:2008 | EN 55014-2: 1997/A2:2008 |
| EN 62233:2008 | EN IEC 55014-2:2021 |
| EN IEC 61000-3-2: 2019/A1:2021 | |
| EN 50665:2017 | EN 61000-3-3:2013/A2: 2021 |
| EN 50663:2017 | EN 62321-1:2013 |
| EN 62311:2008 | EN 62321-2:2021 |
| EN 62479:2010 | EN 62321-3-1:2013 |
| EN 62321-3-2:2020 | |
| EN 62321-3-3:2021 | |
| EN 62321-3-4:2023 | |
| EN 62321-4:2013+AMD1:2017 | |
| EN 62321-5:2013 | |
| EN 62321-6:2015 | |
| EN 62321-7-1:2015 | |
| EN 62321-7-2:2017 | |
| EN 62321-8:2017 | |
| EN IEC 63000:2018 |
Signed for and on behalf of Dreame Trading (Tianjin) Co.,Ltd.
Place of issue: Suzhou China
Date of issue: 2024-05-17
Signature: [Company Seal]
Name, function: Certified Engineer
