PETLIBRO Dockstream Smart Pet Water Fountain User Manual
Model: PLWF105
Product Overview
This section details the components of the PETLIBRO Dockstream Smart Pet Water Fountain.
Package Contents
- 1 x Automatic Pet Water Fountain
- 1 x Power Adapter
- 1 x Power Cable
- 1 x User Manual
Components
The fountain consists of the following parts:
- 1. Spout
- 2. Filter Cover
- 3. Filter
- 4. Stainless Steel Water Bowl
- 5. Filter Tray
- 6. Water Hose
- 7. Foam Filter
- 8. Wireless Water Pump
- 9. Lid
- 10. Water Reservoir
- 11. Power Cable
- 12. Power Adapter
- 13. Reservoir Base
- 14. Load Cell Sensor
Getting Started
Assembly
Follow these steps to assemble the fountain:
- Soak the filter in a bowl of clean water for five minutes, then rinse it thoroughly under running water.
- Install the filter into the fountain and then install the fountain components.
- Route the power cable through one of the cable slots on the underside of the fountain for accurate water level monitoring.
Powering On/Off
To Power On: Connect the fountain with the power adapter and power cable to an electrical outlet.
To Power Off: Unplug the power cable from the electrical outlet.
App Control
Monitor and control your pet fountain using the PETLIBRO app.
- Download and install the PETLIBRO app from your device's app store.
- Follow the in-app instructions to connect the fountain to your Wi-Fi network.
Indicators and Buttons
Wi-Fi Indicator Status
| Indicator Status | Device Status |
|---|---|
| Blinks white once per second | Network configuration mode |
| Solid white | Wi-Fi is connected |
| Blinks red and white once every half second | Network connection failed |
| Blinks red once per second | Firmware Update |
| Off | The fountain is turned off |
Reset Button
Reset Button: Once the fountain is connected to Wi-Fi, press and hold the button for six seconds to reset the Wi-Fi settings. The fountain will enter network configuration mode.
Technical Specifications
| Specification | Details |
|---|---|
| Model | PLWF105 |
| Power Adapter | Input: 100-240V AC, 50/60Hz, Output: 5V DC, 1A |
| Water Reservoir Capacity | 2.5L |
| Wireless Frequency | 2.4GHz |
| Supported System | Android, iOS |
| Material | ABS, Stainless Steel |
| Dimensions | 231 x 191 x 161 mm / 9.1 x 7.5 x 6.3 in |
| Weight | 858 g / 1.91 lb |
Safety Instructions
- Use the fountain in a dry place and on a level surface.
- Dispose of packaging materials properly. Keep plastic bags away from children and pets to prevent suffocation.
- Do not use the fountain with pets that cannot reach the water bowl or have physical disabilities.
- Do not immerse the base of the unit in water, as this can damage the electronic components.
- Do not use the fountain outdoors.
- Operate the fountain only as instructed in this user manual.
- Use only manufacturer-recommended or sold accessories. Using unapproved accessories may lead to unsafe operation.
- Do not modify the fountain.
- Check the fountain after setup. Do not connect if there is water on the power cord or plug.
- Route the power cord to prevent tripping hazards.
- Protect the fountain from weather and temperatures below 0°C (32°F) during operation and storage.
- Do not operate the fountain without first filling it with water.
- Turn off the fountain when it is not in use.
Warranty and Notice
Warranty
- 12-Month Warranty
- For product usage information, please contact customer service via email at support@petlibro.com.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
