Introduction
Boxing is a combat sport in which two opponents of equal size and ability cover their fists with gloves, fighting each other. It is both an amateur and a professional sport, usually used to train the speed and strength of players during boxing training. Since the opponent's gap in boxing matches is so short, speed is more important than strength. For offensive and defensive reflexes, this product uses electronically controlled light guidance to train people's ability to respond by sound signals to accurately hit the target point, thus efficiently forging exercise for one's overall coordination and sensitivity.
Technical Data
Input | DC 5V | Power | 5W |
Working Voltage | 3.7V | Carton Dimensions | 43.5*43*9 cm |
N.W./G.W. | 2 kg/2.5 kg | Battery | NO |
Note: A 2000mA battery capacity is mentioned separately.
Power supply or Charging (If Battery preset)
Use the power supply or charger (5V/1A-2A) to connect the Type C USB cable. Insert the USB into the port of the Musical Boxing Pro. The Musical Boxing Pro should be positioned close to the wall socket.
Diagram shows a USB Type-A connector plugging into a USB Type-C port, labeled "USB" and "Type C".
Operation
Please read the instruction before using.
On/Off: Long press to Power on and Power off.
Bluetooth: Press the On/Off button to power on or power off Bluetooth.
Speed: Press to adjust the speed, displaying H01-H09. Speed increases as the display flashes faster. Default speed level is H01. It also functions as a boxing counter, displaying C00-C99.
Mode: Press to adjust mode, displaying P01-P09. Each mode has different speed and difficulty levels.
Assembly
Option 1: Peel off the transparent film behind the black adhesive tape and paste it to the back of the Boxing Pro (Figure 1). Tear off the transparent film on the other side of the black adhesive tape, then paste the whole Boxing Pro onto the wall or door (Figure 2).
Option 2: Paste the two velcro strips together, peel off the covers of both sides, paste one side to the back of the Musical Boxing Pro and the other side to the wall.
Assembly diagram shows three steps: 1. Back of the unit with film over adhesive tape. 2. Peeling off the film. 3. Attaching to a wall. An alternative shows two velcro strips being prepared for attachment.
Gloves Operation (If included)
Diagram shows a pair of black boxing gloves, one from the front and one from the side, ready to be worn.
(No specific operation instructions for gloves are provided in the text, only the visual representation.)
Caution
- Don't use until 30 minutes after a meal.
- It should not be used during pregnancy or menstruation.
- Electronic products cannot be washed; they can be wiped with a rag.
- The machine battery is out of power; charge it promptly to prevent battery loss.
- Stop using immediately if you feel that your body is not used to it.
- It is recommended to wear boxing gloves when using.
- It is prohibited to disassemble the product without permission.