Precautions
- Ensure the product is fixed on a solid and reliable surface.
- Hit only within the designated hitting area to avoid injury.
- This product is suitable for adults; children should use it under adult guidance.
- Beginners should start with lighter hits to prevent hand injuries.
- Avoid hitting the horn area.
- If the device is not turning on or is abnormal, check the battery level and charge if necessary. Recommended charging is once every 1-2 months if not in use for extended periods.
- The product is not waterproof. Wipe with a dry cloth only.
- Keep this manual for emergency reference.
Product Overview
The Smart Music Boxing Target is an electronic boxing device designed for reaction and strength training, featuring rhythm lights and music playback via Bluetooth.
- 1. Speaker
- 2. Type-C charging port
- 3. Hitting area
- 4. Mounting bracket
Installation
Installation Way 1:
- Use holes No. 1, 2, 3, and 4 for mounting brackets.
- Attach the bracket to the boxing target using flat head screws at holes No. 2 and No. 3.
- Mark holes No. 1 and No. 4 on the wall, drill them using an impact drill, and secure with expansion screws.
- Ensure the installation is firm before use.
Installation Way 2:
- Peel off the double-sided tape on the upper half of the EVA sticker.
- Align the EVA sticker on the back of the product.
- Peel off the double-sided tape on the lower half of the EVA sticker.
- Position and firmly stick to the wall.
Installation Way 3:
- Align and attach the Hook and Loop Fastener with glue to the back of the product.
- Peel off the double-sided tape on the top half.
- Align with the wall and stick firmly.
Instruction for Use
- Short press the switch button to turn on the device; the lights will illuminate, and music will play.
- Long press the switch button for 2-3 seconds to turn off the device.
- The device will automatically shut down after approximately 3 minutes of inactivity.
- Connect to a mobile phone via Bluetooth to play music. The device name starts with "GDBX".
Troubleshooting
| No. | Symptoms | Cause Analysis | Method of Exclusion |
|---|---|---|---|
| 1 | No lights and no sound | The product is not powered on | Short press the switch button. |
| 2 | No lights and no sound | Battery drain | Charge the device. |
| 3 | Lights flicker | Low battery | Charge the device. |
| 4 | Short press the switch button, cannot turn on | The main chip capacitor is short of power due to long-term non-startup. | Repeatedly short press the switch button. |
| 5 | Banging sound inside the device | Normal phenomenon (internal active stress structure) | Normal phenomenon. |
