Sealey - Leading Professional Tool & Workshop Equipment Supplier
Instruction Manual for SEALEY models including: MK54.V3 Folding Bumper Panel Stand, MK54.V3, Folding Bumper Panel Stand, Bumper Panel Stand, Panel Stand
File Info : application/pdf, 2 Pages, 162.51KB
DocumentDocumentFOLDING BUMPER / PANEL STAND MODEL NO: MK54.V3 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. Refer to instruction manual 1. SAFETY 9 Familiarise yourself with the application, limitations and hazards of the panel stand. 9 Maintain the panel stand in good condition (use authorised replacement parts). 9 Keep the panel stand clean for best and safest performance. 9 Locate the panel stand in a suitable work area. WARNING! Use the panel stand on level and solid ground, preferably concrete. 8 DO NOT overload the panel stand. Safe working load 140kg. 8 DO NOT climb on the panel stand. 8 DO NOT use the panel stand for any purpose other than for which it is designed. 8 DO NOT use the panel stand if any parts are damaged or missing as this may cause failure and/or personal injury. 9 Keep the work area clean, uncluttered and ensure that there is adequate lighting. 9 Keep children and unauthorised persons away from the work area. WARNING! The warnings, cautions and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator. 2. INTRODUCTION Ideal for storage of bumpers prior to preparation and spraying. Adjustable stand width with extendable arms makes this unit suitable for holding various types and styles of bumpers. Folds away for easy storage whilst not in use. 3. SPECIFICATIONS Model No:................................................................ MK54.V3 Arms Closed: ............................................................. 700mm Arms Fully Extended: .............................................. 2000mm Folded Height:.......................................................... 1130mm 4. ASSEMBLY Parts assembly are as per parts diagram attached. © Jack Sealey Limited Original Language Version MK54.V3 Issue 1 07/11/22 ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations. REGISTER YOUR PURCHASE HERE Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk www.sealey.co.uk © Jack Sealey Limited Original Language Version MK54.V3 Issue 1 07/11/22