Philips Television

Getting Started: Unpacking and Stand Assembly

This guide helps you set up your new Philips television. Please follow these steps carefully.

Step 1: Unpack and Prepare. Carefully remove the television and accessories from the packaging. It is recommended to place the TV on a soft, flat surface, such as a blanket or the foam packaging, to protect the screen.

Step 2: Attach the Stand.

• Identify the stand components: typically two legs (left and right) and screws.
• For screen sizes 43", 50", and 55", the stand legs are usually marked 'L' (left) and 'R' (right) and attach to the bottom of the TV.
• For the 65" model, the stand assembly might differ slightly but follows a similar principle.
• Align the stand legs with the corresponding mounting points on the TV base.
• Secure the stand legs using the provided screws (often labeled 'x4' indicating four screws are needed). Ensure they are tightened properly.

After assembly, the TV can be placed upright on a stable surface.

Optional: Wall Mounting

Your Philips TV can also be mounted on a wall. Ensure you use the correct VESA mounting hardware.

VESA Mounting Specifications:

• 43" TV: VESA 100x200mm, requires M6 screws with a length of 10mm to 12mm.
• 50" TV: VESA 200x200mm, requires M6 screws with a length of 18mm to 22mm.
• 55" TV: VESA 200x200mm, requires M6 screws with a length of 14mm to 16mm.
• 65" TV: VESA 300x300mm, requires M6 screws with a length of 18mm to 22mm.

Refer to the separate wall mounting instructions or consult a professional if needed. Ensure the wall and mounting bracket are suitable for the TV's weight.

Connecting Your Devices

Connect your external devices to the appropriate ports on the back or side of the TV.

• Antenna/Coaxial: Connect your TV antenna or cable service using the coaxial connector.
• HDMI: Connect devices like Blu-ray players, game consoles, or set-top boxes using HDMI cables. Use the HDMI ARC port for audio output to a soundbar or AV receiver.
• USB: Connect USB drives for media playback or firmware updates.
• Digital Audio Out (Optical): Connect to a soundbar or audio system for digital audio.
• Network: Connect to your home network via LAN cable or Wi-Fi for smart TV features and internet access.

Remote Control: Insert two 1.5V AAA batteries into the remote control. Ensure correct polarity.

Support and Registration

Register your product to receive updates and access comprehensive support.

Visit: https://www.philips.com/TVsupport

For more information and the full user manual, please visit the Philips website.

Product registration and welcome information can be found at: https://www.philips.com/welcome

Important Safety Information

Always read the safety instructions provided with your television before use.