DELAKTIG LED Floor Lamp
Important Safety Instructions
For indoor use only.
Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged, the product should not be used. Keep these instructions for future use.
CAUTION! The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes. Do not immerse in water.
Cleaning: Use a damp cloth, never a strong cleaning agent.
FCC Compliance: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
WARNING: Deviation from the assembly instructions may result in a risk of fire or electric shock.
Assembly Instructions
The following steps describe the assembly of the DELAKTIG LED Floor Lamp.
Parts List
- Screws: 4x
- Screws: 4x
- Screws: 3x
- Screws: 2x
- Wing nut: 1x
- T-nut: 1x
- Allen key: 1x
- Base part 1: 1x
- Base part 2: 1x
- Transformer/Power adapter: 1x
Step 1: Connecting the Lamp Pole
Insert the top section of the lamp pole into the lower section. Secure using two screws and the provided Allen key. Ensure the screws are tightened properly [tightening symbol]. Do not overtighten [cross symbol].
Visual Description: Two figures are shown. The first figure demonstrates inserting one pole section into another, with an arrow indicating the direction of insertion. A close-up shows two screws being inserted into holes and tightened with an Allen key. The second figure shows a crossed-out screw, indicating not to use a different type of screw.
Step 2: Attaching the Lamp Head
Slide the lamp head assembly onto the top of the pole. Secure it using two screws and the Allen key.
Visual Description: A figure shows the lamp pole with the lamp head being attached. A close-up shows two screws being inserted and tightened with an Allen key.
Step 3: Securing the Cord
Use the provided clip or fastener to secure the power cord along the lamp pole. Ensure the cord is tidy and not dangling.
Visual Description: A figure shows the lamp pole with the power cord being guided through a clip or fastener. A close-up shows the cord being secured.
Step 4: Assembling the Base
Attach the two base parts to the bottom of the lamp pole using the provided screws. Ensure they are securely fastened.
Visual Description: A figure shows the lamp pole and the two base parts. Screws are shown being inserted and tightened to connect the base parts to the pole.
Step 5: Connecting to the Bed Frame
The DELAKTIG lamp is designed to be attached to bed frames. Align the lamp's mounting bracket with the designated points on the bed frame. Secure the bracket using the provided screws and wing nuts.
Visual Description: Two figures show the lamp being attached to a bed frame. The first figure shows a person holding the lamp and aligning it with the bed frame. The second figure shows a close-up of the mounting bracket being attached with screws and wing nuts.
Step 6: Securing the Lamp to the Bed Frame
Insert the screws through the mounting bracket and into the bed frame. Tighten the screws using the wing nuts.
Visual Description: A figure shows the lamp's mounting bracket attached to the bed frame. A close-up shows a wing nut being tightened onto a screw.
Step 7: Final Adjustments
Adjust the lamp head to the desired position. The flexible neck allows for easy positioning.
Visual Description: A figure shows the lamp with its head being adjusted. Arrows indicate the movement of the lamp head.
Step 8: Power Connection
Connect the power adapter to the lamp and plug it into a power outlet.
Visual Description: A figure shows the power adapter being connected to the lamp and then plugged into a wall socket.
Step 9: Bulb Replacement
WHEN CHANGING BULB: Use only GUZ 5.3 LED bulb.
Visual Description: A figure shows how to access and replace the LED bulb. It involves unscrewing a part of the lamp head, removing the old bulb, and inserting a new one.
Step 10: Lamp Positioning on Bed
The lamp can be positioned on either side of the bed, attached to the bed frame.
Visual Description: Two figures show the lamp attached to the side of a bed, with the lamp head positioned over the bed.
Step 11: Powering On/Off and Adjusting Brightness
Use the switch on the lamp to turn it on or off. The lamp may have a dimmer function for adjusting brightness.
Visual Description: A figure shows a finger pressing a button on the lamp head, with arrows indicating the lamp turning on or off, and possibly adjusting brightness.
Product Information
Manufacturer: IKEA of Sweden
Model: DELAKTIG
Bulb Type: GUZ 5.3 LED (non-replaceable integrated LED)
Intended Use: Indoor use only
Imported/Distributed by IKEA Supply Mexico, S.A. de C.V.: Av. Paseo de las Palmas 275, Int. 403-404, Lomas de Chapultepec V sección, Miguel Hidalgo, C.P.: 11000 Ciudad de México, México, Tel. 800-1-4532 69.
Read and follow all safety and operation instructions before using this product. For indoor use. Consult electrical specifications on the product labeling.
Multilingual Information
This document contains information in English, French, and Spanish.
- Français: CONSIGNES DE SÉCURITÉ IMPORTANTES, MISE EN GARDE, Entretien. Cet appareil est conforme à la partie 15 des règles de la FCC. ATTENTION: Tout changement apporté à cet appareil non expressément approuvé par la partie responsable de la conformité est susceptible d'annuler le droit de l'utilisateur à se servir de cet équipement. ATTENTION: Tout écart par rapport aux instructions d'assemblage peut entraîner un risque d'incendie ou de choc électrique. REMPLACEMENT DE L'AMPOULE - utiliser uniquement une ampoule à LED GUZ 5.3.
- Español: INSTRUCCIONES IMPORTANTES DE SEGURIDAD, ¡ADVERTENCIA!, Limpieza. Este aparato cumple la parte 15 de las normas FCC. ATENCIÓN: Cualquier cambio o modificación que se realice sin ser aprobado expresamente por la parte responsable de la conformidad, es susceptible de anular el derecho del usuario a utilizar este equipo. ADVERTENCIA: No seguir las instrucciones de montaje puede resultar en incendio o descarga eléctrica. CUANDO CAMBIES LA BOMBILLA: utiliza solo la bombilla GUZ 5.3 LED.
