Sanag DWT-B100-T Bluetooth Headset User Manual and FCC Statement

Product Overview

This document provides instructions for the Sanag DWT-B100-T Bluetooth Headset. It covers wearing methods, operation, app features, charging, precautions, and FCC compliance information.

Product Name: Bluetooth Headset

Product Model: DWT-B100-T

Dimensions: 65*190mm

Package Contents

Illustration showing the contents of the package: two earbuds, a charging case, a USB charging cable, multiple sizes of ear tips, and a user manual.

Wearing the Earbuds

Proper wearing ensures comfort and optimal sound quality. The earbuds can be worn in four ways: up, down, left, and right, referring to the orientation within the ear canal.

Diagram illustrating the correct method for inserting the earbuds into the ear canal. It shows the earbud angled correctly to fit snugly and securely. An incorrect insertion is also depicted, showing the earbud not seated properly.

How to Wear:

Select the ear tip size that provides the best fit and seal.
Gently insert the earbud into your ear canal.
Rotate slightly to ensure a secure and comfortable fit.

How to Remove:

Gently twist and pull the earbud out of your ear.

Operation Guide

Control your Sanag DWT-B100-T headset with simple touch gestures.

Power On/Off

Power On: Long press the touch area on either earbud.

Power Off: Long press the touch area on either earbud.

Pairing and Connection

Open the charging case. The earbuds will automatically pair with each other.
On your device (smartphone, tablet, etc.), enable Bluetooth.
Select "DWT-B100-T" from the list of available Bluetooth devices to connect.

Music Playback

Play/Pause: Single tap the touch area on either earbud. ▶️ / ⏸️
Next Song: Double tap the touch area on the right earbud. ⏭️
Previous Song: Double tap the touch area on the left earbud. ⏮️
Volume Up: Triple tap the touch area on the right earbud. ➕
Volume Down: Triple tap the touch area on the left earbud. ➖

Call Management

Answer/End Call: Single tap the touch area on either earbud. ?
Reject Call: Long press the touch area on either earbud for 2 seconds. ❌

Voice Assistant

Activate Voice Assistant: Long press the touch area on either earbud for 2 seconds. ?️

Low Battery Warning

When the battery is low, a voice prompt "low battery" will be heard.

APP Functionality

Download the Sanag app to unlock additional features and customize your experience.

Illustrations of the Sanag app interface showing various features:

Connection Status: Displays if the earbuds are connected to the device.
Battery Display: Shows the remaining battery level for each earbud and the charging case.
Music Mode: Standard audio playback.
Game Mode: Optimized for low latency during gaming.
Noise Reduction Mode: Activates active noise cancellation (if applicable).
Find Earbuds: Helps locate misplaced earbuds.
Settings: Allows customization of controls, EQ, and other preferences.

Scan the QR codes below to download the app for iOS and Android devices.

QR code for iOS app download.

QR code for Android app download.

Charging Instructions

Charging the Earbuds

Place the earbuds into the charging case. The charging case will automatically charge the earbuds.

Diagram showing the earbuds being placed into their respective slots within the charging case.

Charging the Charging Case

Connect the provided USB charging cable to the charging port on the case and plug the other end into a power source (e.g., USB adapter, computer).

Diagram showing a USB cable connected to the charging port of the case.

Indicator Light Description

Charging Case: A red light indicates the case is charging. The light may turn off or change color when fully charged (specifics not detailed).
Earbuds: A green light on the earbuds indicates they are charging when placed in the case. The light typically turns off when fully charged.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Thank You!

	Sanag B21S Bone Conduction Bluetooth Headset User Manual and Specifications Comprehensive user manual for the Sanag B21S bone conduction Bluetooth headset, covering setup, operation, features, safety precautions, and technical specifications. Includes FCC compliance information.
	sanag B22S Bone Conduction Bluetooth Headset User Manual User manual for the sanag B22S bone conduction sports Bluetooth headset, detailing features, operation, charging, pairing, specifications, and FCC compliance.
	sanag S2 Pro / S2 Pro AI Bluetooth Headset User Guide and Specifications Comprehensive user guide for the sanag S2 Pro and S2 Pro AI Bluetooth headsets. Learn about product features, pairing, app connection, specifications, and important safety information.
	sanag C16S True Wireless Stereo Bluetooth Earphones User Guide Comprehensive user guide for the sanag C16S True Wireless Stereo Bluetooth Earphones, detailing product features, operation instructions, technical specifications, and FCC compliance information.
	sanag T45 Pro MP3 TWS Bluetooth Headset User Guide Comprehensive user guide for the sanag T45 Pro MP3 TWS Bluetooth Headset, covering product overview, operation instructions, Bluetooth pairing, specifications, and FCC compliance.
	Sanag B51S Pro/B51S Pro Max Bone Conduction Bluetooth Headphones Operating Guide This operating guide provides detailed instructions for the Sanag B51S Pro and B51S Pro Max bone conduction Bluetooth headphones. Learn about key features, charging, Bluetooth pairing, button operations, safety precautions, and technical specifications for optimal use.
	Sanag A5X Bone Conduction Bluetooth Headset User Manual Comprehensive operating guide for the Sanag A5X bone conduction Bluetooth headset, covering features, charging, pairing, key operations, and specifications.
	sanag Z51S Pro TWS Bluetooth Headset User Guide Comprehensive user guide for the sanag Z51S Pro True Wireless Stereo (TWS) Bluetooth headset, detailing product features, setup, operation, specifications, and important safety information.