hOmeLabs Beverage Cooler

Important Safety Instructions

Basic safety precautions should always be followed when using electrical appliances to reduce the risk of fire, electric shock, and injury.

• Read all instructions before use.
• Keep ventilation openings clear of obstructions.
• Do not use mechanical devices to accelerate defrosting.
• Do not store explosive substances like aerosol cans.
• Do not use extension cords or ungrounded adapters.
• This appliance is intended for household use only.
• Grasp the plug firmly when unplugging.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless supervised.
• Use the appliance only for its intended purpose.

Warnings Related to Electricity

• Do not damage the power cord.
• Use a dedicated three-hole power socket (15A or more).
• Ensure the power socket has a reliable grounding line.
• The cooler operates on 115V / 60Hz AC power.
• In case of gas leak, turn off the valve, open windows, and contact Customer Support. Do not unplug yourself.
• Do not place electrical devices like microwaves on top of the cooler.
• Always grasp the power plug to remove it from the outlet.
• The power plug must be accessible.

Warnings Related to Use

• Place the cooler in a well-ventilated, indoor environment on flat, sturdy ground. Adjust the feet to level if unstable.
• Be careful not to get fingers or accessories caught in the door.
• This cooler and its packaging are not toys. Adult supervision is required if children use it.
• Keep the cooler away from moist, damp, or humid environments.
• Do not use the cooler as a pedal or support.
• Do not place heavy objects on top of the cooler.
• Do not use this cooler for fresh foods; it is only for chilling beverages.
• Do not put flammable, explosive, volatile, or highly corrosive items in the cooler.

Warnings Related to Placing Items

• Do not place flammable items near the cooler.
• This product is for household refrigeration appliances, mainly for beverage storage.
• Do not cover or close ventilation and exhaust holes.

Before First Use

Placement

1. Remove all packaging materials from inside the cooler. Tear off protective film on the door and body.
2. Place the cooler in a well-ventilated, indoor environment on flat, sturdy ground. Adjust the feet to level if unstable.
3. Allow at least 11.8 in (30 cm) clearance from stoves or furnaces for proper ventilation. Operate in a room of 133 cubic feet or larger.
4. Maintain a circulation space of at least 1.5 in (4 cm) on both sides for power efficiency.
5. Avoid direct sunlight or heat sources. Keep a safe distance of at least 11.8 in (30 cm) from heat sources, using an insulation board if necessary.

Installation

• Keep the unit upright for 24 hours before initial power-up.
• With the cooler empty, set the "Temperature Control" to maximum and leave for 1 hour.
• When loading beverages, maintain a 1.5 in (4 cm) gap between the interior wall and beverages for proper airflow.
• To change door orientation (left-hinge to right-hinge): Remove upper and lower left hinges (3 screws each) and attach them to the right side of the door and cooler body.

Introduction to the Beverage Cooler's Functions

1. Display Controls

Upon first power-on, the display screen shows a full display for 3 seconds with a startup tone.

2. Standby Mode

Press and hold the "Standby" button for 3 seconds to activate standby mode (display cuts off, a beep sounds). Press again to deactivate.

3. Lighting

Press the "Lighting" button to turn the interior light on or off.

4. Temperature Setting

Press "Increase Temperature" to raise the temperature by one degree. Press "Decrease Temperature" to lower it by one degree. To switch between °F and °C, press and hold both "Increase" and "Decrease" buttons simultaneously for 5 seconds.

5. Memory Function

The cooler remembers its settings if turned off and resumes operation with those settings upon power restoration.

6. Fault Indicators

Refer to the table below for fault codes and descriptions:

Disconnecting the Beverage Cooler

Unplug the power cord from the socket to disconnect the cooler.

Cleaning Your Beverage Cooler

Regular cleaning improves cooling efficiency and saves energy. Clean the interior to prevent odors.

1. Unplug the cooler.
2. Wipe the door seal with warm water.
3. Clean the cooler interior with soap and warm water.
4. Reconnect the cooler after cleaning and drying.

NOTE: Do not use abrasive cleaners, solvents, boiling water, or acidic/alkaline substances, as they may damage the cooler's surface.

NOTE: Do not immerse the beverage cooler in water.

Defrost

1. Unplug the beverage cooler.
2. Remove all contents. Store them appropriately to prevent spoilage.
3. Allow the appliance to defrost naturally at room temperature.
4. Wipe any remaining liquid from the interior with a clean, soft cloth.
5. Power on the appliance.
6. Let it run for 2-3 hours before returning beverages.

Frequently Asked Questions

Sounds

Buzzing or gurgling sounds are normal and indicate the unit is operating correctly or that refrigerant is flowing.

Specifications

• Temperature Range: 34-50°F
• Voltage/Current: 115V~ / 1.1A
• Net Weight: 68.3 lb
• Dimensions: W 18.9 x H 33.3 x D 17.30 in

Troubleshooting

Warranty

hOmeLabs offers a limited two-year warranty on new products purchased from hOmeLabs Technologies, LLC or an authorized reseller. The warranty covers defects arising from faulty manufacture, parts, or workmanship, provided there is proof of purchase. It does not cover normal wear and tear, abuse, mishandling, accidents, failure to follow instructions, liquid damage, foreign particle infiltration, or unauthorized servicing or modifications. Commercial or non-household use is also excluded.

The warranty covers restoration of the defective product through repair or replacement of parts and labor to meet original specifications. A receipt indicating the purchase date is required for all claims. Product registration at homelabs.com/reg is recommended but not required to activate the warranty.

The warranty is void if unauthorized third parties attempt repairs or if non-hOmeLabs parts are used. Service may be available after warranty expiration at an additional cost.

For any issues, customers are encouraged to contact hOmeLabs at 1-(800)-898-3002 for assistance.

This warranty provides specific legal rights, which may vary by location.

Product Information

This manual is for model number HME030065N.

SKU#: HME030065N

PART#: HME030065MNL

RATING: 115V, 60Hz, 75W, AC ONLY

WARNING: Keep all plastic bags away from children.

WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Manufacturer, distributor, importer, and seller are not liable for any damage caused by improper use, storage, care, or failure to follow warnings.

Contact Us

Distributed by hOmeLabs LLC

37 East 18 Street, 7th Floor

New York, USA 10003

1-(800)-898-3002

help@homelabs.com

homelabs.com/help

All rights reserved, hOmeLabs™

Made in China.