PeriPage Mini Printer Instruction Manual

Product Overview

This document provides instructions for the PeriPage Mini Printer by PikDik.

Key Components

• Power Button: Press and hold for 2 seconds to turn on/off. Double-click to print the device connection QR code. Click once to terminate printing.
• Paper Change Button: Press both buttons simultaneously to open the cover and exchange paper.
• Type-C Data Cable Port: Used for charging with a power bank or mobile phone charger.

Power Indicator Status

• Green Light On: Normal use status or fully charged.
• Red Light On: Cover opened, no paper, over-heat, or charging.
• Green Light Flashing: Paper suction mode. Ensure folded paper is installed.
• Red Light Flashing: Low battery. Please charge in time.

How to Print

Mobile App Printing

1. Press and hold the power button for 2 seconds to turn on the printer.
2. Search for and download the [MetaPrint] APP from your mobile app store.
3. Open the [MetaPrint] App. Search for and connect to the printer as prompted. Alternatively, double-click the power button to print a QR code, then scan it with the App to connect. (Tip: Do not connect the printer via your phone's Bluetooth settings directly.)
4. Select and edit content within the App, confirm, and print.

App Download:

Search for [MetaPrint] on Google Play or the App Store, or scan the provided QR code to download the app.

Computer Printing

1. Press and hold the power button for 2 seconds to turn on the printer.
2. Connect the printer to your computer using the original Type-C data cable.
3. Visit the official website www.pikdik.com to download and install the printer driver.
4. When printing documents, select the PeriPage printer.

Replacing Paper

Standard Paper Replacement

To replace paper, press the left and right paper exchange buttons simultaneously to open the cover. Place paper with the printing side facing up, ensuring the paper edge is positioned correctly. Close the cover by pressing it down until it clicks shut.

Steps:

1. Open The Cover: Press the left and right paper exchange buttons simultaneously.
2. Put Paper: Place paper with the printing side facing up. Ensure the paper edge is positioned correctly over the printer mechanism.
3. Close The Cover: Press the cover down until it clicks shut.

Folding Paper Installation Guide

Instructions:

1. Unpack: Remove the folded paper from its packaging. Ensure there is enough buffer space for paper feeding.
2. Take out Paper: Remove the top layer of paper, ensuring the printing side faces up. Note the black label on the back of the paper.
3. Loading Paper: Align the paper with the paper inlet. Insert it until it is securely sucked in and cannot be pulled out. Ensure the paper housing is empty and the cover is tightly closed. Press and hold the power button for 2 seconds to turn on the printer.
4. Tear Paper: After printing, tear off the printed sheet along the tear line.

Charging and Maintenance

Charging Instructions

• Use a 5V/2A input mobile phone charger for charging.
• Charge the battery fully before the first use.
• If the printer is not used for an extended period (over 3 months), charge it periodically to prevent natural loss of battery capacity.

Cleaning the Printer Head

Steps:

1. Turn off the printer and open the cover. Remove any paper.
2. Dip a cotton cloth or cotton swab in medical alcohol. Gently wipe the printer head from the center outwards.
3. After cleaning, wait for 1 to 2 minutes for the alcohol to evaporate completely before using the printer again.

Contact Information

Xiamen PikDik Technology Co., Ltd.

Fifth Floor, No.101, Huli Industrial Park, Meixi Road, Tong'an District, Xiamen City, Fujian Province, China

Email: support@pikdik.com

Website: www.pikdik.com

Support: help.ayinprinter.com

FCC Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.