PikDik D11 Mini Label Maker

Specifications

Indicator Description

Product Overview

The D11 label maker is designed for easy label printing. Key physical features include:

• On/Off Button: Located on the device, activated by a long press (approx. 2 seconds).
• Charging Interface: A Type-C port for charging the device.
• Lid Mechanism: The device opens via a slide-down mechanism to access the paper compartment.

Basic Use

1. Step 1: Initial Charging

   Please charge the label maker before using it for the first time.

2. Step 2: Open the Lid

   Slide the lid down to open the device.

3. Step 3: Load Paper

   Insert the label paper into the feed slot with the stickers facing upwards. Ensure approximately 0.1-0.2 inches (2-5 mm) of label paper extends outside the slot port.

4. Step 4: Start Printer

   Press and hold the power button for about 2 seconds to turn on the printer.

5. Step 5: Label Calibration

   For gap labels: Press the power button once. The label will advance and stop at the gap.

   For continuous labels: Slide the label upwards to cut it outside the slot port to start printing.

App Download and Bluetooth Connection

To use the D11 label maker, download the 'BEEPRT MINI' app from the App Store or Google Play. Alternatively, scan the provided QR code for direct download.

Bluetooth Connection:

• Ensure both the D11 device and your phone's Bluetooth are turned on.
• Open the FlashMini app.
• Connect the device within the app (do not pair via phone settings). Tap to search for the device, typically listed as 'D11_xxxx_BLE'. Select the correct device to establish a connection. If prompted for a PIN, enter '0000'.
• Upon successful pairing, the power indicator light will change from green to blue.

Troubleshooting

Common Issues and Solutions:

• Device not found by app: Bluetooth may be slow. Try reopening the app and rebooting the device. Reinstalling the app or contacting customer service may also help.
• Printing blank paper: The label paper might be inserted in reverse. Ensure the sticker side faces up.
• Printer keeps feeding paper: Check for label residue on sensors, the paper bin, or the print head. Ensure you are using compatible PikDik label paper, as other brands may cause issues. If problems persist, the detectors might be malfunctioning.
• Printing suddenly stops: The printer has safety features that halt printing due to issues like 'lack of paper', 'cover open', or 'overheating'. Check the printer's status.
• Centering label content: In the app's text editing mode, use the 'T' options for alignment (center, left, right). You can also drag the text box with your fingers to adjust position.
• Batch printing support: The D11 supports batch printing. The app allows up to 999 labels per batch, though the practical limit may be around 200 labels depending on label size.
• Blank paper and cracking sound: Ensure 0.1-0.2 inches of label paper is left outside the slot. The paper may also be used up and needs replacement.
• Printing offset issues: Ensure you are using PikDik label paper. If the device cannot detect the paper, the detector may be malfunctioning. Check for paper jams or residue on the print head or in the paper bin.
• Automatic shut down: The printer automatically shuts down after 15 minutes of inactivity or Bluetooth disconnection to save power.
• Frequent Bluetooth disconnection: This could be due to a Bluetooth system crash. Try rebooting your phone and the device's Bluetooth.
• Faint or gray printouts: The preset number of labels may have been exceeded, or incompatible label paper is being used. The printer might also be malfunctioning.

Warnings

• Ensure the paper bin is clean. A clogged print head can be damaged during printing. Clean the paper bin and print head with isopropyl alcohol.
• Turn off the power immediately if the printer malfunctions.
• Do not disassemble the printer, as it contains complex internal components.
• Charge the battery in a cool, airy environment. Avoid high temperatures, humidity, or water contact to prevent short circuits, overheating, or explosion. If the power adapter contacts liquid, disconnect power immediately. If smoke or odor is detected, unplug the adapter and handle with care to avoid burns.
• Do not squeeze, shake, modify, or use a damaged power adapter or cord.
• When unplugging the printer, hold the power adapter, not the cable, to prevent cable damage.
• Do not use the printer near flammable materials.
• Avoid using the printer while it is charging or when the battery is low.

Warranty

The print head is guaranteed for 3 months or 30 km of printing (whichever comes first). Other parts are guaranteed for 12 months from the date of purchase.

Warranty services are void if:

• The printer is disassembled, repaired, or modified without authorization.
• Damage is caused by man-made factors or force majeure.
• Damage results from accidents, misuse, or the use of unauthorized consumables.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Consumables and Support

For consumables or further support, visit www.PikDik.com or scan the provided QR code.

Contact Information:

• Email: support@pikdik.com
• Live Chat: Scan the QR code to connect with support from 10 am to 10 pm EST.