Fresh 'n Rebel Twins¹ Quick Start Guide

Find the Full Manual in Your Own Language

The full manual is available on our website. Visit www.freshnrebel.com to find it in your preferred language.

We Are Fresh 'n Rebel

Fresh 'n Rebel shares a genuine and never-ending love for music, fashion, and colours, with a bold spirit. They create mobile must-haves designed to be seen and complement personal style. Born and based in Rotterdam, Netherlands, their urban designs cater to those who embrace the unknown and value good quality and fine details.

Getting Started

Attention: Before getting started, remove the safety covers from the earbuds and place them back in the charging case.

Illustration shows earbuds placed inside the charging case.

Illustration shows earbuds placed inside the charging case.

First Time Pairing

Open the charging case and take out the earbuds. They will automatically enter pairing mode. Select "Twins¹" in your device's Bluetooth menu to connect.

Illustration shows the charging case opened with earbuds inside, ready for pairing.

Illustration shows a smartphone screen displaying Bluetooth settings with 'Twins 1' selected for connection.

Every subsequent time you open the charging case, your Twins¹ will automatically turn on and connect to your phone within seconds. When you place the earbuds back in the charging case and close it, they will automatically disconnect and turn off.

Touch Controls

• Play/Pause: Tap the touch control area on either earbud twice (2x) or hold for 2 seconds.
• Voice Assistant: Tap the touch control area on either earbud three times (3x).
• Incoming Call: Answer or decline by tapping the touch control area twice (2x) on either earbud.
• Previous Song: Hold the touch control area on the left earbud (L) for 2 seconds.
• Next Song: Hold the touch control area on the right earbud (R) for 2 seconds.
• Hang Up Call: Tap the touch control area on either earbud twice (2x).

LED Behaviour

Earbuds

• Blinking very slowly: Connected
• Blinking: Earbuds are reconnecting to each other
• Blinking very fast: Searching for connection

Case (outside)

• Blinking very slowly: Charging with cable
• Off: Not charging
• On: Fully charged

Case (inside) - Battery Indicator

• 1 LED blinking: Case needs to be charged
• 1 LED (0-25%): Battery remaining in case
• 2 LEDs (25-50%): Battery remaining in case
• 3 LEDs (50-75%): Battery remaining in case
• 4 LEDs (75-100%): Battery remaining in case

Features

Playtime earbuds: 4 HOURS

Recharging earbuds: 1.5 HOURS

Total playtime: 4 HOURS + 20 HOURS = 24 HOURS (At average use for music and phone calls at 50% volume).

Double Master: Use the left and right earbuds separately or together.

FAQ

What is Double Master?

• The Double Master functionality means both earbuds have a built-in microphone, allowing individual use (either right or left) or stereo sound when paired.
• Single Master allows using only the right earbud individually or both together. The left earbud cannot be used separately from the right.

I can't seem to get touch control to work, what should I do?

Aim for the LED and try touching with a bit more force.

My earbuds don't turn off automatically when I put them back in the charging case, what can I do?

Check if 1 LED is blinking inside the charging case. This indicates the case battery is too low to connect to the earbuds and turn them off automatically. Charge the case to resolve the issue.

Troubleshooting

One of my earbuds doesn't work anymore, what can I do?

• Place the earbuds back in the charging case, close the case, and wait 10 seconds before trying again.

How do I solve my connection issues?

• Place the earbuds back inside the charging case and leave the lid open.
• Hold the reset button for 5 seconds until the outside LED blinks 3 times. Your Twins¹ will reset.

Declarations

Hereby, Sitecom declares that this radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.freshnrebel.com. Operating frequency band: 2400 to 2480 MHz. Maximum radio-frequency power transmitted: 8 dBm / 6 mW.

(Note: Declarations in other languages were present in the original document but are summarized here in English for conciseness and primary language focus.)