Fresh 'n Rebel Twins Quick Start Guide

Let's Get Started

Attention: Before getting started, remove the safety covers from the earbuds and place the earbuds back in the charging case.

Diagram Description: An illustration shows an open charging case with two earbuds inside. Labels point to 'Battery indicator', 'Reset button', 'Charging port', and 'Charging LED'. Another illustration shows the two earbuds being placed into the charging case.

First Time Pairing

Open the charging case and take out the earbuds. They will automatically go into pairing mode. Select the Twins¹ in your Bluetooth menu to connect to your device.

Every next time you open the charging case, your Twins¹ will automatically turn on and connect to your phone within seconds. When you put the earbuds back and close the charging case, they will automatically disconnect and turn off.

Diagram Description: Two steps are shown. Step A shows the earbuds being removed from the charging case. Step B shows a smartphone screen with Bluetooth settings, displaying 'Twins 1' as a connectable device.

Touch Controls

Play/Pause: Tap the left or right earbud twice (2x).

Voice Assistant: Tap the left or right earbud three times (3x).

Incoming Call: Tap the left or right earbud twice (2x) to answer, or tap twice (2x) to decline.

Previous Song: Press and hold the left earbud for 2 seconds.

Next Song: Press and hold the right earbud for 2 seconds.

Hang Up Call: Tap the left or right earbud twice (2x).

Diagram Description: Multiple diagrams illustrate the touch controls for various functions like play/pause, voice assistant, answering/declining calls, skipping tracks, and hanging up calls, indicating which earbud (L or R) to use and the number of taps or duration of press.

LED Behaviour

Earbuds

• Blinking very slowly: Connected
• Blinking: Earbuds are reconnecting to each other
• Blinking very fast: Searching for connection

Case (outside)

• Blinking very slowly: Charging with cable
• Off: Not charging
• On: Fully charged

Case (inside)

Battery indicator:

• 1 LED blinking: Case needs to be charged
• 1 LED (0-25%): Battery remaining in case
• 2 LEDs (25-50%): Battery remaining in case
• 3 LEDs (50-75%): Battery remaining in case
• 4 LEDs (75-100%): Battery remaining in case

Features

Playtime earbuds: 4 HOURS

Recharging earbuds: 1.5 HOURS

Total playtime: 4 HOURS (earbuds) + 20 HOURS (case) = 24 HOURS. At average use for music and phone calls at 50% volume.

Double Master: Use the left and right earbuds separately or together.

Diagram Description: Illustrations show the earbuds with a music note symbol indicating playtime, and a battery icon indicating recharging time. Another diagram illustrates the concept of 'Double Master' by showing the earbuds used together and separately.

FAQ

What is Double Master?

• The Double Master functionality means that both earbuds have a built-in microphone, so you can use the earbuds individually (either the right or the left one) or both of them as a pair for stereo sound.
• Single Master means you can use only the right earbud individually or the right and left earbuds together. You can never use the left earbud separately from the right earbud.

I can't seem to get touch control to work, what should I do?

• Aim for the LED and try touching with a bit more force.

My earbuds don't turn off automatically when I put them back in the charging case, what can I do?

• Is 1 LED blinking inside the charging case? Then the battery level of the case is too low to connect to the earbuds and automatically turns them off. Charge the case and the issue will be solved.

Troubleshooting

One of my earbuds doesn't work anymore, what can I do?

• Put the earbuds back in the charging case, close the case and wait 10 seconds before trying again.

Diagram Description: An illustration shows the earbuds being placed back into the charging case, with a timer indicating 10 seconds.

How do I solve my connection issues?

• Place the earbuds back inside the charging case and leave the lid open.
• Hold the reset button for 5 seconds until the outside LED is blinking 3 times. Your Twins¹ will reset.

Compliance Information

Hereby, Sitecom declares that this radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.freshnrebel.com. Operating frequency band: 2400 to 2480 MHz. Maximum radio-frequency power transmitted: 8 dBm / 6 mW.

The document also includes declarations of conformity in Dutch, German, Italian, Spanish, Portuguese, French, Polish, Romanian, and Greek, all stating compliance with Directive 2014/53/EU and providing the same operating frequency band and maximum radio-frequency power transmitted.

Find the Full Manual

Find the full manual in your own language on our website: www.freshnrebel.com

About Fresh 'n Rebel

We are Fresh 'n Rebel. We share a genuine and never-ending love for music, fashion and colours, and are bold at heart. We create mobile must-haves that people want to be seen with and really complement someone's style.

Fresh 'n Rebel was born in Rotterdam and is still based in this creative and raw soul of the Netherlands. Our urban designs are made for those who dare to go for the unknown and want to surround themselves with good quality and the finest details as much as we do.

Diagram Description: The Fresh 'n Rebel logo, a stylized crab, is displayed.

Keep in Touch

freshnrebel.com

#freshnrebel

Keep in touch:

Instagram Facebook