Equipos profesionales para bomberos forestales | Vallfirest
User Manual for VALLFIREST models including: LT-02010, Extinguisher Backpack, Backpack, Extinguisher, LT-02010 Extinguisher
il y a 1 jour — Change the tank or replace the elements when necessary for proper operation.*. * (View spare parts page). Replace tank. 360 Coupling replacement.
Change the tank or replace the elements when necessary for proper operation.*. * (View spare parts page). Replace tank. 360 Coupling replacement.
When using retardant products, once used must clarify the inner bag with clean water and empty using pump. 2.- After using keep always the Knapsack ...
File Info : application/pdf, 8 Pages, 1.63MB
DocumentDocumentUSER' MANUAL VALLFIREST EXTINGUISHER BACKPACK www.vallfirest.com Description Filling tank Adjustment Hand pump Maintenance Spare parts CONTENT 1 2 3 4 5 6 info@vallfirest.com COMPONENTS 1 Wide mouth fill port with built in plastic filter screen that can't fall into bladder 2 TWO sturdy handles to make filling easier 3 Padded and contoured shoulder straps with daisy chain for pouches 4 Shoulder straps have Velcro to secure the hand pump or other accessories 5 Replaceable, low cost internal water bladder 6 Carrying pouch for food, fittings or other item 7 Multiple securing straps for a pulaski, shovel or other tools 8 A padded waist belt to get some of the load off your shoulders 9 Waist belt can accommodate a fire shelter or other pouches 2 1 2 6 7 3 8 4 9 info@vallfirest.com 2 Filling tank 2.1 Hold backpack by both handles to keep cap horizontal. 2.2 Unscrew the cap without remove filter. Filter ensure tank not get damaged by particles. 2.3 Fill the water tank with a maximum of 5.4 gallons. 2.4 Find a collegue to easyer filling. 3 Adjustments 3.1 Two sturdy handles to make filling easier 3.2 Waist and shoulders adjustments 3.3 Padded waist belt to get some of the load off your shoulders. 3.4 Shoulder straps have Velcro to secure the hand pump or other accessories. 3.1 3.2 3.3 3.4 3.2 3.2 4 Hand Pumps Match with: Hand pump simple effect and empty/spray adjustments Press metallic blade Spray regulator Hand pump double effect and empty/spray adjustments Rotate spray regulator MAINTENANCE 1.- When using retardant products, once used must clarify the inner bag with clean water and empty using pump. 2.- After using keep always the Knapsack Ergonomic Backpack Pump Carrier VALLFIREST empty of water. 3.- Change the tank or replace the elements when necessary for proper operation.* Replace tank 1. Unplug the 360 coupling. 2. Remove the plug and unscrew the plastic nut. 3. Remove interior ring and filter. 4. Open back zipper. 5. Remove the water tank through the zipper. 6. Introduce new tank and do the steps in reverse order. 360 Coupling replacement A. Breaking ears clip B. Cutting 2 cm hose Unscrew coupling after breaking clip Unscrew coupling before cutting hose 1. Unscrew coupling. 2. Screw on new coupling. 3. Pass hose through the ears 4. Fit hose over hose coupling get clip (15/18). hose contact the coupling wall. * (View spare parts page) SPARE PARTS CODIGO INTERNO (REF.) IMAGEN UNIDADES ENGLISH DESCRIPTION BVB0101-P010A 1 VF Knapsack CORDURA BAG BVB0101-P020A 1 VF Knapsack YELLOW BLADDER (TANK) BVB0101-P040A 1 VF Knapsack STOPPER CAP BVB0101-P050A 1 VF Knapsack FILTER BVB0101-P060A BVB0101-P070A 1 VF Knapsack SPACER 1 VF Knapsack SCREWED BUSHING BVB0101-P080A BVB0101-P090A BVB0101-P100A BVB0101-P110A ZEZ0901-00001 ZEZ0901-00002 ZEZ0901-00003 BVB0101-P030A BVB0101-P120A BVB0101-P130A ZEZ0801-00001 ZEZ0801-00002 1 VF Knapsack STOPPER SCREW NUT 1 VF Knapsack O-RING STOPPER 2 VF Knapsack RUBBER FLAT SEAL 1 VF Knapsack PLASTIC FLAT SEAL 1 BUSHING BOLT 1/4"x26 1 BUSHING NUT 1/4" 2 BUSHING WASHER 30x13.5x2 1 VF Double Effect Hand Pump 1 VF Knapsack 1M HOSE 1 VF Knapsack 360 COUPLING 1 TWO EAR CLIP 13/15 1 TWO EAR CLIP 15/28 NOTA: for any information please contact with us: info@vallfirest.com / tel. + 34 938 678 779