Pigeon MagMag Instruction Manual

Cleaning

After use, immediately remove all attached parts and wash the cup and parts using PIGEON Liquid Cleanser or a cleanser for baby products. Do not use a dish-drying machine, as the heat may cause parts to deform.

Gently wash the heat/ripple opening and ventilation valves on the heat/ripple and spout with both hands. Scrubbing or pulling too hard on these parts may cause the valves to split, resulting in leakage.

A white powdered food additive has been applied to protect the ventilation valves on the heat/ripple and spout, and the opening on the tip. Wash thoroughly before first use.

Sterilization

The MagMag can be sterilized using boiling, chemical, microwave, and steam sterilization methods.

Boiling Sterilization

Thoroughly wash the parts and place them in water. Turn on the heat and boil the water. After the water starts to boil, sterilize for 5 minutes.

Chemical Sterilization

Use chemical sterilization products specifically designed for sterilizing nursing bottles and nipples/ripples.

Microwave Sterilization

Ensure you use products made specifically for microwave sterilization. Follow the instruction manual provided with your microwave oven.

Steam Sterilization

Follow the instruction manual provided with the sterilization products.

MagMag Nipple Cup (from 3 months onwards)

STEP 1: Baby's first cup with handles

Description of image: An exploded view showing the components of the MagMag Nipple Cup: Hood, Teat/Nipple, Cap, Gasket, Adaptor With Handles, and Cup.

MagMag Spout Cup (from 5 months onwards)

STEP 2: Train your baby to drink using openings other than teats

Description of image: A diagram illustrating the progression of baby cup usage, showing the Teat/Nipple stage from 3 months, Spout stage from 5 months, and Straw stage from 8 months.

MagMag Straw Cup (from 8 months onwards)

STEP 3: Train your baby to drink using a straw

Description of image: An exploded view of the MagMag Straw Cup components: Hood, Cap, Spout, Inner Adaptor, Gasket, Upper Straw Part, Lower Straw Part, and Cup.

Precautions for use

WARNING! Always use this product with adult supervision.

• Never use feeding teats as a soother.
• Continuous and prolonged sucking of fluids can cause tooth decay.
• Always check food temperature before feeding.
• Straws are not suitable for children under 6 months.

Precautions when using MagMag Spout Cup

• Avoid putting hot liquids in the cup as they may cause burns. The cup has a strong hermetic seal. If hot liquids are added and the cup is tilted, the contents may leak from the ventilation valves.
• The spout has a ventilation valve. When drinking, ensure the ventilation valve is positioned on top. If the ventilation valve is at the bottom, liquid may leak from the valve.

Description of image: Diagrams showing the correct and incorrect positioning of the spout cup to prevent leakage, highlighting the ventilation valve.

Precautions when handling MagMag

• Before first use, clean and sterilize thoroughly to ensure hygiene.
• Inspect the feeding teat/nipple before each use and pull it in all directions. Discard and replace immediately if any sign of damage or weakness is present. Spare parts are available.
• Do not leave a feeding teat/nipple in direct sunlight or heat, or in disinfectant solution for longer than recommended, as this may weaken the teat/nipple.
• Keep in a dry, sealed container.
• Clean before each use.
• To prevent burning or scalding, do not use with hot liquids.
• If subjected to high temperatures exceeding heat-resistant limits, the MagMag may change shape or break.
• Follow the assembly directions in this manual and ensure each piece is firmly set. Incorrect assembly may lead to leakages.
• For outdoor use, it is advisable to keep the cup in a waterproof bag to minimize the chances of leakage.

Precautions for heating liquids in a microwave oven with MagMag

• The MagMag is not intended for use as cookware; use only to heat liquids.
• Do not heat the cup in the microwave when sealed. Remove all other parts and use only the cup for heating.
• Be cautious when microwave heating, as it produces localized high temperatures.
• Do not use the oven or grill function, as the cup may deform.
• The MagMag cannot be used for freezing and thawing.
• Avoid heating foods or drinks with a high oil content in the cup.
• Do not heat the cup if it is empty.
• For other precautions, refer to the instruction manual of your microwave oven.

How to Assemble

MagMag Nipple Cup Assembly:

1. Grasp the stopper firmly.
2. Place over the cap.
3. Press down firmly.
4. Press with your finger to make sure that the ventilation valve opens.
5. Place the cap with the attached teat/nipple on the adaptor and close firmly.
6. Place the gasket in the adaptor. The gasket has a front and back. Set the gasket so that you can see the round marks.
7. Place the adaptor straight down on the cup and make sure that it is securely attached. If the cap and adaptor are not firmly attached, leakages may occur.

Description of image: A step-by-step visual guide for assembling the MagMag Nipple Cup.

MagMag Spout Cup Assembly:

1. Slide on the disk.
2. Fasten the side bolts and the inner adaptor. The inner adaptor cannot be positioned or removed when the lid is closed.
3. Attach the spout to the inner adaptor.
4. Pull gently on the back of the ventilation valve on the spout plate to ensure the valve opens. [View from the bottom]
5. Match the groove in the spout and the ridge on the adaptor, and attach the spout.
6. Place the cap over the spout and adaptor and tighten firmly.

Description of image: A step-by-step visual guide for assembling the MagMag Spout Cup.

MagMag Straw Cup Assembly:

1. Slide the lid.
2. Fasten the side bolts and the inner adaptor. The inner adaptor cannot be positioned or removed when the lid is closed.
3. Attach the spout to the inner adaptor.
4. Pull gently on the back of the ventilation valve on the spout plate to ensure the valve opens. [View from the bottom]
5. Match the groove in the spout and the ridge on the adaptor, and attach the spout.
6. Place the cap over the spout and adaptor and tighten firmly.

Description of image: A step-by-step visual guide for assembling the MagMag Straw Cup.