BEACON 5-in-1 Turntable System

Important Safety Instructions

Please read these instructions carefully before operating the appliance and keep them for future reference.

• Read all safety and operating instructions.
• Keep these instructions for future reference.
• Heed all warnings on the appliance and in the instructions.
• Follow all operating and use instructions.
• Do not use near water or moisture.
• Clean only with a dry cloth.
• Do not block ventilation openings.
• Do not install near heat sources.
• Protect the power cord from being walked on or pinched.
• Only use manufacturer-specified attachments/accessories.
• Use only with the manufacturer-specified cart, stand, tripod, bracket, or table. Use caution when moving combinations.
• Unplug during lightning storms or when unused for long periods.
• Refer all servicing to qualified personnel.
• The mains plug is the disconnect device and shall remain readily operable.
• Do not expose to rain or moisture; do not place liquid-filled objects on the apparatus.
• Use in moderate climates.
• Do not impede ventilation by covering openings.
• Do not place open flame sources on the apparatus.
• The symbol ⚡ indicates AC voltage.
• Servicing instructions are for qualified personnel only. Do not perform servicing beyond operating instructions unless qualified.

WARNING: To reduce the risk of fire or electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified personnel.

CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.

AVERTISSEMENT: RISQUE DE CHOC ÉLECTRIQUE – NE PAS OUVRIR.

Features

The BEACON 5-in-1 Turntable allows you to play vinyl records and listen to FM radio stations. It features:

• 3-speed record player (33 1/3, 45, 78 RPM).
• Dual Bluetooth feature: stream vinyl to external Bluetooth speakers or stream music from a smart device to the Beacon's speakers.
• 3.5mm Aux Input and RCA Audio Output for additional playback options.
• Blue Accent Lighting.
• Built-in stereo speakers.

Specifications

Note: Specifications and accessories are subject to change without notice. Distance may vary depending on objects or interference between devices.

Product Overview

Main Features

Diagram showing the top view of the turntable with labels:

• 45 rpm Record Adapter
• Turntable
• Tone Arm Lift Switch
• Tone Arm Lock
• Tone Arm & Stylus
• Speakers
• Display & Controls
• Auto Stop Select ON or OFF
• Record Speed (Choose 33, 45, or 78 RPM)
• Function Dial (Turn to switch modes)
• Master Volume

Rear Inputs

Diagram showing the rear view of the turntable with labels:

• Dust Cover
• DC Power Input
• Aux In
• Audio Output (Connect to send audio signal to an external source)

Setup & Basic Operation

Connect to Power Source

1. Plug the small end of the power cord into the POWER Input on the back of the unit, and the large plug into a standard wall power outlet.
2. Press the Power [power-symbol] button to turn on the unit.

Using the FM Radio

Tuning the FM Radio

1. Press the Power [power-symbol] button and set the Function Dial to FM.
2. The FM icon will turn on, and the frequency will show on the LCD display.
3. Press and hold the TUN+ or TUN- button to search for the previous/next available FM station.
4. For better reception, try Manual Tuning: briefly tap TUN+ or TUN- to fine-tune the station.
5. Adjust the MASTER VOLUME for desired volume.
6. Press the Power [power-symbol] button to turn off the radio when finished.

To set FM Radio presets

Store up to 20 FM stations for easy recall.

1. Turn on the unit and set the Function Dial to FM.
2. Use TUN+ or TUN- to select the desired station.
3. Press and hold the MEM button; the preset channel number (e.g., “P01”) will blink.
4. Tap the [skip-back-symbol] or [skip-forward-symbol] button to select a preset location (P01-P20).
5. Press the MEM button again to confirm.
6. Repeat steps 2-5 to preset up to 20 stations.

Recall a preset station

Tap the M+ button repeatedly until you reach the desired preset number/radio station.

Playing a Record

Handle the tone arm, stylus, and other components with extreme care as they are sensitive and can break easily.

1. Press the Power [power-symbol] button and set the Function Dial to Phono.
2. Lift the turntable dust cover, remove the stylus cap, and release the tone arm lock.
3. Select the correct turntable speed (33 1/3, 45, or 78 RPM) based on the record type.
4. For 45 RPM records, use the included adapter.

Diagrams illustrating tone arm lock/unlock and turntable speeds for 33 1/3 RPM (12in), 78 RPM (10in), and 45 RPM with adapter (7in).

Tone Arm Operation:

1. Use the Tone Arm Lift Switch to raise the Tone Arm.
2. Gently swing the Tone Arm over the record. The turntable will start spinning.
3. Use the Tone Arm Lift Switch to lower the stylus onto the record. Using the switch reduces the risk of accidental damage.
4. Auto Stop: Slide the Auto Stop Switch to ON to automatically stop the turntable when the record finishes.
5. When the record ends, use the Lift Switch to raise the stylus and return the Tone Arm to its catch.
6. If the Auto Stop area is outside the unit's range, the record may stop before the last track. In this case, set the Auto Stop Switch to OFF and use the Tone Arm Lift Switch to manually raise the stylus.
7. When not in use, secure and lock the Tone Arm in its resting position and replace the protective shroud over the stylus to prevent damage.

Connecting to Bluetooth®

Pairing a Bluetooth® enabled Device with the Turntable

1. Press the Power [power-symbol] button and set the Function Dial to BT.
2. Press and hold the PAIR [bluetooth-symbol] button; the Bluetooth indicator will blink, and the unit will enter pairing mode.
3. Keep your device within 3 feet of the unit during pairing.
4. Turn on Bluetooth on your device and search for nearby devices.
5. Select "VICTOR VHRP-1200" from the device list. If prompted, enter the passcode "0000".
6. A chime will sound, and the Bluetooth indicator will light steadily when successfully paired.

Note: The unit stays paired unless manually unpaired or reset. If connection fails, repeat pairing steps or press and hold the PAIR button.

Playing Audio Wirelessly

1. After pairing, use your device's controls to play audio.
2. Audio will play through the connected Bluetooth device's speakers or the turntable's speakers, depending on the mode.

Stream Music from the Turntable to an external Bluetooth® Speakers

1. Power on the unit and set the FUNCTION dial to Phono mode.
2. Press and hold the BT OUT button. The unit enters pairing mode, and the BT indicator blinks.
3. Turn on your Bluetooth speakers and search for them. Turn off unused Bluetooth receivers to avoid linking to unwanted devices.
4. The effective distance is 33 feet (10 meters).
5. The turntable will auto-scan and pair with nearby Bluetooth receivers. The BT indicator will stop blinking when connected.
6. Play music on the turntable in Phono or AUX mode. Sound will now play through the connected Bluetooth device speakers instead of the turntable speakers.
7. Press and hold the BT OUT button when finished. The BT indicator will turn off, and the unit speakers will function again.

Notes:

• Bluetooth Transmit/Out function is disabled when Bluetooth Receive/In or FM Radio modes are active.
• There may be a brief sound delay when enabling Bluetooth Transmit/Out.
• Bluetooth Out (Transmitter) can only pair with Bluetooth receivers (headphones, speakers) for wireless streaming. Use your Bluetooth device's volume control as needed.

Connecting to External Systems

RCA Audio Output

Requires RCA audio cables (red/white, not included).

1. Connect RCA audio cables to the RCA Audio Output on the turntable and to the audio input of an external stereo system, television, or other source.
2. Adjust the external stereo system to accept input from the turntable.
3. Audio played through the turntable will now be heard through the connected stereo system.

Diagram showing RCA connections.

Using the AUX IN (3.5mm Audio Input)

Requires a 3.5 mm audio input cable (not included).

1. Plug a 3.5 mm audio input cable into the Aux In jack on the turntable and connect the other end to the audio output/headphone output of an MP3 player or other audio source.
2. Set the FUNCTION Dial to AUX and use the controls on your connected music player to select and play audio.
3. Audio played through the connected device will now be heard through the speakers.

Diagram showing 3.5mm Aux input connection.

FCC NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

The device must not be colocated or operating in conjunction with any other antenna or transmitter.

To maintain compliance with FCC's RF exposure guidelines, place the product at least 20cm from nearby persons.

ISED STATEMENT

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

• (1) This device may not cause interference.
• (2) This device must accept any interference, including interference that may cause undesired operation of the device.

The device must not be co-located or operating in conjunction with any other antenna or transmitter.

This device complies with IC radiation exposure limits set forth for an uncontrolled environment.

The device should be installed and operated with a minimum distance of 20cm between the radiator and your body.

CAUTION ON MODIFICATIONS

Any changes or modifications not expressly approved by the grantee of this device may void the authority granted by the FCC to operate this equipment. Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment if not handled correctly. Electric and electronic equipment is marked with the crossed-out trash can symbol ?, signifying it should not be disposed of with household waste but separately. Cities have collection points for free recycling of electric and electronic equipment. Additional information is available at your city's technical department.

CALIFORNIA PROP 65 WARNING

“WARNING” This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. For more information on these regulations and a list of chemicals, visit: http://www.oehha.ca.gov/prop65.html

CE FC ROHS

SUPPORT

For product support, please contact customer support. If you experience issues, consult this manual. Visit www.naxa.com for the latest news, alerts, and documentation.

Naxa Technical Support

2320 East 49th St.
Vernon, CA 90058
(866) 411-6292
http://www.naxa.com/supportcenter

*This product has been manufactured and sold under the responsibility of NAXA ELECTRONICS INC. VICTOR and the DOG & GRAMOPHONE logo are trademarks used under license by NAXA ELECTRONICS INC. Further information at www.victor-brand.com. All other products, services, companies, trademarks, trade or product names and logos referenced herein are the property of their respective owners.