Smoon M01 Handlebar Mount

Contents

• M-01 - Handlebar Mount XL
• RB-28 – MOON light adapter for GoPro mount
• M-01-J – GoPro mount joint
• M-GA - Garmin insert

Optional Accessories

• RB-27 – MOON light adapter for GoPro mount
• M-BR – Bryton insert

Compatibility

• Fits 31.8 mm handlebars
• Compatible with Garmin Edge models: 1030, 1000, 820, 810, 800, 520, 510, 500
• Compatible with Wahoo ELEMNT, ELEMNT Bolt, ELEMNT Mini
• Supports GoPro-style action cameras
• Works with MOON light models using RB-25 / RB-26 handlebar bracket

Specifications

• Weight: 45 g (excluding RB-28 & M-01-J)

Installation

Handlebar Mount

To install the mount on your handlebars:

• Open the upper clamp by removing the bolt. [Tool icon: screwdriver]
• Place the mount onto the handlebar.
• Close the clamp.
• Reinsert and tighten the bolt into the clamp. [Arrow icon: up]

Diagram Description: Shows the handlebar mount with its clamp mechanism. The first step illustrates removing a bolt to open the clamp. The second step shows the mount positioned on a handlebar, the clamp closed, and the bolt being reinserted and tightened.

MOON Light Attachment

To attach a MOON light:

• Remove the bolts from the GoPro mount. [Tool icon: screwdriver]
• Attach the RB-28 adapter to the GoPro mount.
• Secure the adapter by reinstalling the bolt. [Arrow icon: up]
• Slide the MOON light into the RB-28 adapter until it clicks into place.
• Adjust the light to the desired angle, then tighten the bolt. [Circular arrow icon]

Diagram Description: Shows the GoPro mount with bolts removed. The RB-28 adapter is shown being attached to the mount. An arrow indicates the adapter being secured with a bolt. The final image shows the MOON light sliding into the RB-28 adapter until it locks, with a circular arrow indicating angle adjustment and tightening.

Cycling Computer Mount

The mount is compatible with various cycling computers. Follow the steps below for installation based on your device type.

Compatible Inserts:

• M-GA: For Garmin and Wahoo computers
• M-BR: For Bryton computers (optional)

Installation Steps:

• Select the appropriate insert (M-GA for Garmin/Wahoo, M-BR for Bryton).
• Align the insert with the mounting base.
• Secure it using the provided screws. [Tool icon: screwdriver]
• Attach your cycling computer by twisting it into the insert until it locks into place.

Diagram Description: Shows three sets of inserts (M-GA and M-BR) and their corresponding mounting bases. The diagrams illustrate how the inserts fit into the base and how a cycling computer is attached to the insert.

GoPro Camera Mount

• Remove the bolt from the GoPro mount. [Tool icon: screwdriver]
• Attach the camera to the GoPro mount in the desired direction.
• Tighten the bolt securely.

Warning

• This setup is designed for bike use only.
• Improper installation or failure to follow the original design intentions may result in damage to the bike and/or personal injury.
• Periodically check and tighten all bolts to ensure safety and stability.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly; you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

This product complies with the legal requirements of the following European Union directive(s): 2014/30 /EU.

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19/EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.