Installation Guide for WIM HOF models including: Icebarrel XL Passion Ice Baths, Passion Ice Baths, Ice Baths, Baths

PIB The Ice Man's Barrel installation manual

user guide

The Wim Hof Icebarrel XL | Ultimate Cold Therapy Experience – Passion Ice Baths To install your ice bath, refer to The Wim Hof Icebarrel

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 4 Pages, 8.54MB

Document Document

The Wim Hof Icebarrel XL
Installation manual

Installing the chiller
To complete the installation, all you need is a flathead screwdriver or a kitchen knife to connect the chiller and your ice bath will be ready to use.

2x

2x

2x

2x 2x

Installing the step and seat
To install the step and seat, you'll need a bag of sand to fill them and a crosshead screwdriver or kitchen knife to open the screws.

Setup the chiller

Run

Up

Set

Down

1. Powering On the Chiller

Step 1:

Step 2:
 Step 3:


Plug the chiller into a power source. The display will automatically light up, indicating it's connected to power.

Press

to turn the system on.

Press

to start the pump.


Note: The system will not function unless the pump is turned on.

2. Setting the Desired Temperature

Step 1:
 Step 2:

Step 3:


Press

before making any temperature adjustments.


Press

or to adjust the temperature until you

reach the desired setting.


Release the button, and the display will blink for a few seconds. Once it stops blinking, the system will start working to the new target temperature.

Additional Features
Some models may offer features like lighting or an oxygen pump. However, this specific model does not have an oxygen pump.

Indicator light