UMLO V111 Cordless Vacuum Cleaner User Guide
Product Overview
This guide provides essential information for operating and maintaining your UMLO V111 Cordless Vacuum Cleaner.
LED Display Features
The LED display provides real-time status information:
- Battery Indicator: Shows remaining battery level.
- Roller Tangled Alert: Notifies if the roller brush becomes tangled.
- Filter Clogged Alert: Indicates when the filter needs cleaning or replacement.
- Power Mode Indicator: Displays the currently selected suction mode.
- Power Mode Switch: Button to cycle through power modes.
Selectable Power Modes
Low Mode:
- Suction: Up to 8Kpa
- Runtime: Up to 60 minutes
Medium Mode:
- Suction: Up to 15Kpa
- Runtime: Up to 35 minutes
High Mode:
- Suction: Up to 25Kpa
- Runtime: Up to 15 minutes
Versatile Cleaning Capabilities
The UMLO V111 is designed for versatile cleaning tasks around the home. It can be used on various surfaces including carpets and hard floors, and for reaching different areas like ceilings and upholstery.
Visuals show the vacuum cleaner being used effectively for general floor cleaning, reaching high areas, and cleaning furniture.
Getting Started and Operation
1. Charging
Connect the main motor unit to the charger.
Visual shows the vacuum cleaner main unit connected to a charger, with a second image showing the battery being charged.
- The battery can only be charged when connected to the main motor.
- Charging takes approximately 5 hours.
- Use only the original charger.
2. Power On
Press the power switch to turn the vacuum on.
Visual shows a finger pressing the power switch on the main body of the vacuum cleaner.
3. Switching Power Modes
Touch the '+/-' buttons to switch between power modes.
Visual shows fingers touching the '+' and '-' buttons on the vacuum cleaner's handle, with the LED display showing power mode selection.
Maintenance
Emptying the Dust Cup
Empty the dust cup when the dust level reaches the MAX indicator.
Visual shows the dust cup being detached from the vacuum and emptied into a trash bin.
Cleaning the Roller Brush
If the LED display indicates the roller brush is tangled or stuck, clean it promptly.
Visuals show the steps to detach the roller brush from the cleaner head, remove debris, and clean it using the provided tool.
- Unlock the side lock on the bottom of the cleaner head.
- Remove the side cover.
- Take out the roller brush and clean it with the cleaning tool.
Cleaning the Filters
Regularly clean the filters for optimal performance.
Visuals show the different filter components and how to clean them, possibly with water and sunlight for drying.
Note: Please re-assemble them only when they are completely dry.
Filter Installation
Follow these steps to install or replace the filters:
Step 1:
Visual shows the filter component.
Step 2:
Visual shows the filter holder and how to insert the filter.
Step 3:
Visual shows aligning the filter holder with a slot.
Make sure the NOTCH on the filter holder fits into the slot perfectly.
Step 4:
Visual shows the filter assembly being placed into the vacuum body, with a checkmark indicating correct placement.
Close Cover, Keep Strainer Straight.
Step 5:
Visual shows the main filter unit.
Step 6:
Visual shows the final filter assembly being inserted into the vacuum cleaner.
