Onn ONA17AA015 CD Mini Stereo System

Warnings and Precautions

• CAUTION: To prevent electric shock, match the wide blade of the plug to the wide slot and fully insert.
• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
• CAUTION: Use of controls or adjustments other than specified may result in hazardous radiation exposure.
• WARNING: Unauthorized modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
• WARNING: Do not place the unit on soft, porous, or sensitive surfaces without a protective barrier to avoid damaging the surface.
• WARNING: Use of this unit near fluorescent lighting may cause interference. If erratic behavior occurs, move the unit away from fluorescent lighting.
• CAUTION: Danger of explosion if battery is replaced incorrectly. Replace only with the same or equivalent type.
• WARNING: The remote control's button cell battery contains mercury. Do not put in trash; recycle or dispose of as hazardous waste.
• WARNING: Lithium batteries are recyclable and should be recycled or disposed of properly. Contact your local government for disposal practices. Never incinerate, as they may explode.
• CAUTION: Risk of electric shock. Do not open.
• WARNING: To reduce the risk of electric shock, do not remove the cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel.
• The lightning flash with arrowhead symbol ⚡ indicates the presence of uninsulated "dangerous voltage" that may pose an electric shock risk.
• The exclamation point symbol ❗ indicates important operating and maintenance instructions in the accompanying literature.
• WARNING: This product uses a Class 1 laser. Avoid direct exposure to the laser beam when the CD door is open and safety interlocks are defeated.

Important Safety Instructions

1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Power Sources: This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.
16. Water and Moisture: This product should be kept away from direct contact with liquids. The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.
17. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries shall not be exposed to excessive heat such as sunshine, fire, etc.
18. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
19. Do not install this equipment in a confined or "boxed-in" space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc.
20. This apparatus is for professional use only.
21. When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.
22. WARNING: Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product.

FCC Warnings

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTICE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Additional Warnings

• Do not expose the apparatus to dripping or splashing. Do not place objects filled with liquids (e.g., vases) on top of the apparatus.
• The adapter is used as a disconnect device and should remain readily operable during intended use. To disconnect the apparatus from the mains completely, the adapter should be disconnected from the mains socket outlet completely.
• Batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.
• Caution marking is located at the back of the apparatus.

Features

• CD player: CD, CD-R/RW
• Full-range speakers
• Preset EQ (4)
• Line input
• AM/FM stereo radio
• Station memory presets/AMS (automatic memory store)
• Digital clock
• Remote control
• Timer
• RCA stereo inputs
• Vertical loading CD player
• Stereo headphone jack

Included

• Model ONA17AA015
• AC adapter
• Remote control
• Product guide

Specifications

General

Radio Section

Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document.

Introduction

This document provides a product guide for the Onn CD Mini Stereo System, model ONA17AA015. It covers setup, operation, and specifications.

Main Unit Overview

The main unit features:

• 1. CD DOOR: For inserting and removing CDs.
• 2. POWER: Button to turn the unit on or off.
• 3. FUNCTION: Button to cycle through input modes (CD, Radio, AUX, Bluetooth).
• 4. OPEN: Button to open the CD door.
• 5. LCD DISPLAY: Shows current mode, time, track information, etc.
• 6. STOP: Stops CD playback or switches FM radio mode.
• 7. PLAY/PAUSE/PAIRING: Plays/pauses CD, recalls radio stations, or initiates Bluetooth pairing.
• 8. TUNING: Adjusts radio frequency or selects CD tracks.
• 9. VOLUME: Adjusts the audio volume level.
• 10. DC IN: Port for the AC adapter.
• 11. HEADPHONE: Jack for connecting headphones.
• 12. SPEAKER OUT -R: Right speaker output.
• 13. SPEAKER OUT -L: Left speaker output.
• 14. AUX IN -R: Right auxiliary audio input.
• 15. AUX IN -L: Left auxiliary audio input.
• 16. LINE IN: Line input for audio devices.

Remote Control

The remote control allows operation of the stereo system. Key buttons include:

• DISPLAY: Press to view the clock on the LCD display.
• STANDBY: Press to turn the unit on/off. Press to turn off the alarm when it has sounded.
• TUNE/SKIP/SEARCH: In radio mode, tunes the AM/FM frequency. In CD mode, selects tracks. Long press searches tracks at high speed.
• MODE/CLK PROG: In CD mode, sets playback modes (Normal, Repeat 1, Repeat All, Random). When CD is stopped, programs CD tracks. When unit is OFF, sets the clock. In Radio mode, saves AM/FM stations.
• FUNCTION: Switches between CD, Radio, AUX, and Bluetooth modes.
• PLAY/PAUSE/PAIRING/M+: In CD mode, plays/pauses. In radio mode, recalls saved stations. In Bluetooth mode, long press to disconnect.
• EQ: Switches between Rock, Pop, Jazz, or Classic EQ settings.
• MUTE: Mutes the audio output.
• VOLUME (+/-): Increases or decreases the volume level.
• SLEEP/ALARM SET: Sets the sleep timer or sets the alarm when the unit is OFF.
• STOP: Stops CD playback. In radio mode, switches FM radio mode.
• SNOOZE: Delays the alarm for 9 minutes. In radio mode, selects FM mono or ST.

Setup

Power

Plug the attached 5V/2.3A adapter into a standard AC power outlet to power the home theater system.

Remote

The remote requires 1 CR2025 battery (pre-installed). The diagram shows a CR2025 lithium battery being inserted into the remote's battery compartment. The compartment cover should be opened, the battery placed correctly (positive side up), and the cover closed.

Speakers

Plug the speaker cables into the corresponding colored speaker outputs (e.g., red to red, black to black, or as indicated by L/R terminals).

CD Playback

Playing a CD

If this is your first time playing a CD, remove the cardboard disc from behind the CD DOOR before attempting to play an actual CD.

1. Press the OPEN button to open the CD DOOR.
2. Insert a CD into the unit.
3. Press the POWER button to turn on the unit.
4. Press the FUNCTION button until the unit is in CD mode. The loaded CD will play automatically.
5. Press the MODE/CLK/PROG button to select the play mode: Normal → Repeat 1 → Repeat all → Random → Normal.

Programming a CD

1. Follow the steps for "Playing a CD", then press the STOP/BAND button.
2. Press the MODE/CLK/PROG button. "PROGRAM" and "P-01" will appear on the LCD display, indicating program mode.
3. Press the TUNE/SKIP buttons to select the desired track.
4. Press the MODE/CLK/PROG button to select the track. "P-01" will change to "P-02".
5. Repeat steps 3 and 4 until the desired CD tracks are programmed.
6. Press the PLAY/PAUSE/M+ button to play the programmed tracks.
7. To review programmed tracks, press the MODE/CLK/PROG button repeatedly in stop mode.

Bluetooth Wireless Streaming

1. Turn on the unit by pressing the STANDBY button.
2. Press the MODE button to set the unit to "BT" mode.
3. Press the PAIRING button on the top of the unit. "ONA17AA015" will appear on your Bluetooth-enabled device. Select "ONA17AA015" from the available list and your Bluetooth audio device to connect. To pair with a different device, press the PAIRING button to disconnect the current device or ensure the current device is out of range.
4. During playback, press the PLAY / PAUSE button to pause, and again to resume playback.
5. While in STOP mode, press SKIP UP + or SKIP DOWN – to select a specific track.
6. To skip forward or backward on the disc, press SKIP UP + or SKIP DOWN – to go to the beginning of the next or previous track.
7. To search within a track, press and hold the SKIP UP + or SKIP DOWN – button.

Note: If the last paired Bluetooth audio device is powered on and within range, it will automatically reconnect to the ONA17AA015.

Clock and Alarm

Setting the Clock

1. Press the STANDBY button to turn off the unit.
2. Press the MODE/CLK/PROG button; the display will flash the time.
3. Press the TUNE/SKIP buttons to adjust the hour and minute.
4. Press the MODE/CLK/PROG button to confirm the adjusted time.

Note: A PM INDICATOR will appear on the display when the time is set in the PM. Ensure the correct AM/PM is set.

Setting the Sleep Timer

1. Press the STANDBY button until the unit is turned on.
2. Press the SLEEP/ALARM SET button until "SLEEP" appears on the LCD.
3. Press the SLEEP/ALARM SET button consecutively to adjust the sleep timer between 0 and 90 minutes.
4. After the allotted time has expired, the unit will power off.

Note: When the sleep time is 00, the sleep timer is off, and the "sleep" icon will disappear.

Setting the Alarm

1. Press the STANDBY button to turn off the unit.
2. Press and hold the SLEEP/ALARM SET button; the display will flash the time.
3. Press the TUNE/SKIP buttons to adjust the hour and minute.
4. Press the SLEEP/ALARM SET button to confirm the adjusted alarm time. An alarm clock icon ⏰ will appear on the LCD Display when the alarm is set.
5. Press the FUNCTION button to select CD, RADIO, or BUZZER. For BUZZER mode, no indication is shown.
6. To stop the alarm after it has sounded, press the STANDBY button.

Note: A PM INDICATOR will appear on the display when the time is set in the PM. Ensure the correct AM/PM is set.

Cancelling the Alarm

1. Press the SLEEP/ALARM SET button twice to cancel the alarm. The ALARM icon on the display will disappear.
2. To resume the alarm, simply press the SLEEP/ALARM SET button again. The ALARM icon will reappear.

Radio, Auxiliary Input, and Line Input

Using the Auxiliary Input

Requires a RCA Cable (not included).

1. Connect an audio device to the AUXILIARY INPUT.
2. Press the FUNCTION button to set the unit to AUX mode as indicated on the LCD Display.
3. The audio device will play through the speakers.

Note: The AUXILIARY INPUT will not work when a device is connected to the LINE INPUT.

Using the Line Input

Requires a Line Input Cable (not included).

1. Connect audio devices including phones, tablets, and MP3 players to the LINE INPUT.
2. Press the FUNCTION button to set the unit to AUX mode as indicated on the LCD Display.
3. The audio device will play through the speakers.

Note: When the LINE INPUT is connected, the AUXILIARY INPUT will not work.

Using the Radio

1. Press the STANDBY button until the unit is turned on.
2. Press the FUNCTION button to set the unit to Radio mode as indicated on the LCD Display.
3. Press the STOP button to select FM radio bands.
4. Press the TUNE/SKIP buttons to adjust the radio frequency.
5. Press and hold the PLAY/PAUSE/M+ button to enter automatic station searching.

Saving with Program

1. Tune the radio to the station you want to save.
2. Press the MODE/CLK/PROG button to enter program mode, then press the PLAY/PAUSE/M+ button to select a preset number.
3. Press the MODE/CLK/PROG button again to save the current station.
4. Repeat steps 1-3 to program more stations.

Note: You can program up to 20 FM presets and 10 AM presets.