Vanguard VEO3T265HABP Aluminum Travel Tripod User Manual

Attaching the Ball Head

Diagram shows the ball head being screwed onto the top of the center column of the tripod.

Screw the ball head securely onto the threaded post at the top of the tripod's center column.

Attaching the Removable Pan Handle

Diagram shows the pan handle being attached to the ball head.

Attach the removable pan handle to the designated port on the ball head for enhanced control during panning shots.

Attaching the Quick Release Plate to Camera

Diagram shows a camera with the quick release plate screwed onto its base.

Screw the quick release plate onto the tripod mounting thread on the base of your camera. Ensure it is firmly attached.

Mounting Camera to Tripod

Diagram shows the camera with plate being inserted into the ball head clamp and locked.

Insert the camera's quick release plate into the ball head's clamp. Tighten the clamp lever or knob to secure the camera. Double-check that it is locked in place.

Extending and Locking Legs

Diagram shows the flip locks on the tripod legs being opened and the leg sections extended.

To extend the tripod legs, flip open the locking levers on each leg section. Pull the sections to your desired length and firmly close the levers to lock them in place.

Adjusting Center Column Height

Diagram shows the center column lock being loosened and the column being raised.

Loosen the center column locking knob to adjust the height of the center column. Once the desired height is reached, retighten the knob to secure the column.

Using the Ball Head Controls

Diagrams show the main ball head lock knob and the independent pan lock knob.

• Ball Head Lock: Loosen the large knob on the ball head to freely move and position your camera. Tighten the knob to lock the camera in the desired position.
• Pan Lock: Use the separate knob for independent panning control. Loosen it for smooth horizontal movement and tighten to lock the pan axis.

Using the Built-in Smartphone Holder

Diagram shows the smartphone holder extending and a smartphone being placed into it.

Extend the integrated smartphone holder, typically located on the center column or pan head assembly. Place your smartphone securely into the holder.

Low Angle Shooting

Diagram shows the tripod legs spread wide for low-angle photography.

For low-angle shots, spread the tripod legs wide apart and adjust the center column or use the ball head to position the camera close to the ground.

Using the Hanging Hook

Diagram shows a bag hanging from the hook at the bottom of the center column.

To enhance stability, especially in windy conditions or when using heavy equipment, hang a camera bag or other weight from the hook located at the bottom of the center column.