mailto:parts@so-low.commailto:sales@so-low.commailto:service@so-low.com
Instructions for SO-LOW models including: MV4-2UCRDA Undercounter Freezers and Refrigerators, MV4-2UCRDA, Undercounter Freezers and Refrigerators, Freezers and Refrigerators, Refrigerators
13 set 2022 — BEFORE CALLING THE MANUFACTURER'S TECHNICAL SUPPORT DEPARTMENT. Please have the model number of the unit, box identification number, and serial number ready ...12 pagine
File Info : application/pdf, 12 Pages, 2.11MB
DocumentDocumentTo reduce the risk of fire, electric shock or injury to persons using this freezer, read all instructions and follow basic safety precautions before using the unit, including the following: Do not modify the plug provided with the unit. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not position equipment so it is difficult to disconnect from the power supply. While under warranty, do not attempt to repair or replace any part of the freezer for servicing without first contacting the So-Low Service Department. BEFORE CALLING THE MANUFACTURER'S TECHNICAL SUPPORT DEPARTMENT Please have the model number of the unit, box identification number, and serial number ready as well as the problem description. The model, serial number and box id number can be found on the serial tag, which is located on the interior left upper wall, or back of the unit. SAVE THESE INSTRUCTIONS PRE-INSTALLATION INFORMATION................................................ MOISTURE DURING THE SUMMER SEASON.................................. DOOR GASKET REPLACEMENT..................................................... MONITOR PROBE FOR FIELD INSTALLATION.................................. CLEANING AND DEFROST PROCEDURE...................................... CLEANING THE CONDENSER..................................................... CONTROL PROGRAMMING.......................................................... HOW TO CALIBRATE THE CONTROL.............................................. CONTROL SETTINGS BASIC CONTROL SETTINGS........................................................ ADVANCED SETTINGS.................................................................. THE HIDDEN MENU..................................................................... MV4-2UCRDA MV4-2UCRGDDA MV4-6UCRDA MV4-6UCRGDDA MV20-2UCF MV25-4UCF MV30-4UCF MV40-4UCF DHK4-10GD DHK4-10SD DHK30-10SD DHK20-20MDP DH-9RFDA 115 VOLTS 60 HERTZ 1 PHASE (SUPPLY VOLTAGE SHOULD NOT VARY MORE THAN 5% FROM SERIAL PLATE RATINGS.) 15 AMP DEDICATED LINE NEMA 5-15 (Unit prewired at factory includes cord and plug set.) · · · · · · ° CAUTION DO NOT CONNECT TO GFI / GFCI OUTLETS. CONNECTION TO THAT TYPE OF OUTLET CAN RESULT IN PRODUCT LOSS DUE TO UNSAFE CABINET TEMPERATURE WHEN GFI DEVICE TRIPS FROM MOISTURE. DO NOT USE EXTENSION CORDS AND DO NOT DISABLE OR BY-PASS GROUND PRONG ON ELECTRICAL PLUG ELECTRICAL PLUG · PLUG THE UNIT INTO THE PROPER OUTLET WITH AN ADEQUATE POWER SUPPLY. · THIS UNIT REQUIRES A DEDICATED ELECTRICAL LINE. · UNIT PRE-WIRED AT FACTORY AND INCLUDE CORD AND PLUG SET. CAUTION DISCONNECT THIS UNIT FROM THE POWER SUPPLY BEFORE PERFORMING MAINTENANCE ON THE UNIT. · · LED MODE FUNCTION MESSAGE CAUSE · · · · · · · · · · · o o · · · · · · · · · · · · · · · · · ·