COFFEE MAKER

IMPORTANT NOTES

The RESET button (H): If the unit overheats, it will automatically shut off. Press the RESET button on the back panel to resume operation.

The DRAIN SCREW (I): Residual water remains in the machine's pipes and parts after use. Always empty the coffee maker before moving or storing. Loosen screw (I) at the bottom rear of the machine to drain excess water into a suitable container. Tilting the unit may be necessary to remove the last drips.

STORING THE COFFEE MAKER

IMPORTANT: Before storing, ensure the coffee maker is switched off, disconnected from the mains, and completely cool. Also, ensure the machine is fully emptied of water (refer to drain screw notes).

• Store in a dry, dust-free environment.
• Avoid direct sunlight.
• Avoid extreme temperatures.
• Keep out of reach of children.

SYMBOL DEFINITION

? Indicates the On/Off switch that starts the coffee brewing process. This button also switches on the base hotplate (F).

? Indicates the On/Off switch that switches on the top hotplate (G).

PARTS IDENTIFICATION

• (A) Hinged lid
• (B) Status indicator light (next to On/Off switches)
• (C) On/Off switches (shown in the OFF position)
• (D) Filter basket (slides out by pulling on the handle)
• (E) Coffee Jug
• (F) Bottom Hotplate (underneath the coffee jug)
• (G) Top Hotplate (observe extra caution if using this hotplate)
• (H) RESET button (at back)
• (I) Drain screw

Pictures for illustration purposes only. Actual product may differ slightly.

SPECIFICATIONS

PLEASE READ ALL THESE INSTRUCTIONS BEFORE USE AND RETAIN FOR FUTURE REFERENCE!

IMPORTANT SAFETY NOTES!

• Verify that the mains supply voltage matches the rating plate before connecting.
• Place the coffee maker on a stable, level surface, away from the edge of the worktop to prevent accidental tipping.
• Ensure the power cable does not hang dangerously or contact hot surfaces.
• Use only the provided jug. Do not place the jug on a cooker hot plate or in a microwave. Avoid placing a hot jug on wet or cold surfaces. Do not use a cracked jug or one with a loose handle.
• Keep the appliance out of reach of children.
• Caution: Surfaces become very hot during use. Use provided handles.
• Never immerse the appliance, power plug, or cable in water or any liquid. Keep the unit away from liquids, moisture, or splashing.
• Always switch off, disconnect from mains, and allow to cool before cleaning or removing parts.
• Ensure switches (C) are in the off position before unplugging.
• Do not use if the cord, plug, or unit is damaged. Consult a qualified person if in doubt.
• Do not attempt to dismantle the appliance; it contains no user-serviceable parts.
• This appliance is intended for domestic use only.
• The unit must be fully drained of water before moving or storing.
• Never insert objects into the unit's openings.

BEFORE FIRST USE

1. Remove all packaging materials.
2. Clean the appliance as per the CLEANING section.
3. Run the appliance 2-3 times with water only (no coffee) to remove manufacturing odors and residues.

BASIC OPERATION

1. Place the appliance on a stable, level, non-slippery surface, away from heat sources or flammable materials. Follow all safety guidelines.
2. Slide out the filter basket (D) using the handle, insert a coffee filter paper, and fill with ground coffee. Slide the basket back into place.

   Note: Use approximately one spoon of coffee per cup of water, adjusting to taste.

3. Open the lid (A) and pour up to 1.6L of cold water into the opening. Do not overfill.
4. Place the coffee jug (E) on the base hotplate (F). Ensure the jug's intake opening aligns with the filter basket's output.
5. Connect to mains power, switch on the socket, and press the left On/Off switch (C). The indicator light will illuminate, signaling the start of coffee preparation. Coffee will begin dispensing into the jug shortly.

   CAUTION: The machine heats up immediately upon switching on the On/Off switch (C). Exercise caution.

6. When brewing is complete, the indicator light will turn off. Wait one minute for dripping to stop before serving.
7. To keep coffee hot, leave the jug on the base hotplate (F) or the top hotplate (G). Activate the top hotplate by pressing the right On/Off switch (C).
8. After use, switch both switches (C) to the off position and unplug from the mains. Clean the coffee maker.

CLEANING and MAINTENANCE

IMPORTANT: Ensure the coffee maker is switched off, disconnected from the mains, and completely cool before cleaning or maintenance.

• Daily: Wash the jug and filter basket with warm, soapy water. For stubborn stains, soak the jug in a water & vinegar solution for 20 minutes, then rinse thoroughly.
• Wipe the exterior with a soft, damp cloth, then polish with a dry cloth. Do not use abrasive cleaners or metallic objects.

NEVER IMMERSE THE APPLIANCE!

DESCALING

Depending on water hardness, interior parts may calcify. Descale approximately every 6 months to maintain optimal condition and brewing results. Descale if brewing time increases, sounds become louder, or the machine shuts off with water remaining in the tank.

1. Prepare solution: Dissolve 100g descaler in 1L cold water, OR mix 300g lemon juice with 1L warm water (below 50°C).
2. Insert the filter basket (without coffee).
3. Place the empty jug under the filter basket.
4. Carefully fill the water tank with the prepared solution.

(Note: The descaling process instructions appear incomplete in the provided PDF excerpt, detailing only preparation and initial steps.)