Installation Guide for Home Depot models including: abf12348-d80c-4fe0-9524-c74a356f426b, Full Length Mirror, Length Mirror, Mirror
2 days ago — *Please make sure that theinstalled wall is a load bearing wall. *Please be awared of the wires and water pipes while drilling. Product and accessories.
Full Length Mirror 3Installation Options 1.Wall mounted 2.Paste installation 3.Leaning on the wall Installation Instruction Before Installation *Please make sure that theinstalled wall is a load bearing wall. *Please be awared of the wires and water pipes while drilling Product and accessories 3M adhesivestrip*8 S Glue*1 Non-slip Mat*4 Screw*2 Expansion screw*2 1.Wall mounted Tools Needs(not included in the package) Pencil Electric Drill Hammer Tapeline Level Ruler Screwdriver 1. 1.Measure the distance between the two hooks and mark the points on the wall 2. 2.Drill holes at the marking points with an electric drill 3. 3.Insert the plastic expansion tube into the wall with hammer then screw into the expansion tube. Rememberto leave 5mm distance from the wall. 2.Paste installation 1. 1.Stick83M rubber strips on the back of the frame respectively. 2. 2.Apply structural adhesive to the back of the frame and tear off the back of the adhesive tape. 3. 3.Stick the mirror on the wall. Note:the wall should be smooth and flat when pasting(wall covering /wallpaper,wet/dusty wall can't be pasted).Adobe Photoshop for Windows -- Image Conversion Plug-in WPS 文字