PetTec Plush Pet Toy Trout - Interactive Motion Toy for Cats

Product Introduction

Thank you for choosing the PetTec Plush Pet Toy. With this interactive toy, your pet will always be engaged and entertained.

Specifications

• Name: Plush Pet Toy
• Model: Trout
• Dimensions: 300 x 110 x 60 mm
• Weight: 110g
• Battery: Lithium-Ion/500mAh/5V
• Included Content: Fish Toy, Micro-USB cable, 2x Catnip sachets, Manual

Charging

The toy fully charges in one hour. One charge provides approximately 150 dancing cycles. The LED indicator turns green when charging is complete.

Catnip

Use only catnip that is sealed into a porous bag, such as a teabag. Two catnip bags are included.

Insert the catnip bag into the provided pouch and close it with the Velcro fastener.

Important: Do not use loose catnip, as this can damage the mechanism.

How to Play / Use

1. Open the fish on its belly by pulling apart the Velcro fastener.
2. Fully charge the dancing fish with the supplied Micro-USB charging cable until the LED turns green.
3. Insert the catnip into the pouch on the side, move the switch to the ON position, and close the fish.
4. The motion sensor activates when the toy is moved, cycling through 3 types of realistic movements sequentially.
5. The toy enters sleep mode when it is not being touched. It does not need to be turned off unless you wish to prevent movement upon touch.

Important: Be sure to turn off and remove the mechanism from the fish before cleaning the soft outside cover.

Important Safety Instructions

• The device is designed for pets. Not recommended for children without adult supervision.
• Please do not immerse the Plush Toy in water and do not soak the Plush Toy when the electronics are inside.
• Do not immerse the device in other liquids. The mechanism that makes the fish move is not waterproof. If the fish is dropped in water, the electronics will get damaged.
• Remove the electronics from the Plush Toy before cleaning it.
• Do not put the Plush Toy in the microwave or in an oven. Do not expose the Plush Toy to high temperatures.
• Do not expose to hot sources such as fire or prolonged direct sunlight.
• The Plush Toy is designed as a toy for cats! It is not intended for any other use.
• Stop using the product if the battery begins to smell or smoke.
• If you experience any malfunction, contact customer service directly.
• The toy is designed for indoor use only. Leaving it outside may cause it to dampen and damage the mechanism.

Manufacturer Information and Service

If you have questions about the PetTec Plush Pet Toy or experience problems using it, please contact Stage10 GmbH via email at info@PetTec.de.

PetTec® is a brand of Stage10 GmbH, Oranienburger Str. 45, 10117 Berlin, Germany. Visit www.PetTec.com for more information.

Disposal

Packaging Disposal: Please sort the packaging before disposal: Cardboard and paperboard with paper recycling, plastic wrap with recyclables.

Device Disposal: Applicable in the European Union and other European countries with systems for separate collection of recyclables. Do not dispose of used devices with household trash! If your Plush Pet Toy is no longer usable, each user is obligated by law to dispose of used devices separately from household trash, e.g., at a collection site in your municipality. This ensures that used devices are recycled properly and negative environmental effects are avoided. Electronic devices are marked with the [WEEE symbol].

Support

You can find further information about our products, troubleshooting, and helpful tips at: support.PetTec.de.

Declaration of Conformity

Stage10 GmbH confirms that the product described in these instructions (PetTec Plush Pet Toy) conforms to guideline 2014/53/EU. The complete text of the EU declaration of conformity is available at the following URL: support.pettec.de/hc/de/categories/360003070060-PetTec-Plush-Toys.

Products designated with the [CE certified] symbol fulfill all applicable community provisions of the European Economic Area.