Radioshack Dual 10" 2-Way PA Speaker
Model: 4001958
1. Packing Contents
- 1x speaker
- 1x remote control
- 1x user's guide
- 1x power cable
2. Specifications
- Dual 10" active speaker box with rechargeable battery
- Input: AC100-240V, 50/60Hz or rechargeable battery
- Woofer: 10" woofer, 300z (120mm), (38mm) voice coil
- Tweeter: 25mm
- Sensitivity: 93dB (+/-3dB)
- Rechargeable battery capacity: 12V, 7AH
- With MP3, USB, FM, SD card socket
- Remote control included
3. Player Controls
1. SD card slot: Insert an SD card with MP3 files.
2. Mode: Select operating modality (SD, USB, Bluetooth, FM).
3. Play/pause: Press to play or pause. In FM mode, press to automatically search for stations.
4. Repeat Mode: Select repeat mode (One, All, Random).
5. Next/volume+: Press to skip to the next song/station. Press and hold to increase volume.
6. Previous/volume-: Press to skip to the previous song/station. Press and hold to decrease volume.
7. USB input with MP3 file.
Connection Bluetooth
- Press "mode" repeatedly on the MP3 player until Bluetooth mode is selected.
- Enable Bluetooth device discovery mode on your cell phone or audio device.
- When your device shows "RS4001958", confirm the link.
4. Amplifier
Controls:
- Master Volume
- Treble
- Bass
- Microphone Volume
- Microphone Treble
- Microphone Bass
- Echo
- Microphone Priority Switch
Inputs/Outputs:
- AUX Output
- AUX Input
- Microphone Input 1
- Microphone Input 2
- AC Power Input
- DC 12V Input
Indicators:
- Charge Indicator
- Power Indicator
- Overload Indicator
Power Switch
5. Remote Control
1. Play/pause. Program FM radio stations.
2. Set equalizer mode.
3. Volume Up/Down.
4. Previous song/station.
5. Next song/station.
6. Track selection keys: Enter track number.
7. Pick song: Select a desired track by entering its number and pressing this button.
8. Enter: Choose repeat mode.
9. Mode: Select operating modality (SD, USB, FM radio, AUX, Bluetooth).
10. Battery compartment (CR2025).
11. Select FM frequency.
6. Caution
- Avoid exposing the speaker box to moisture. If used outdoors, ensure it is under cover.
- Do not use or store the equipment near wet or damp places, as it may cause malfunction or shock hazard.
- If the power cord is broken, it must be replaced by the manufacturer, service agent, or qualified personnel to avoid risks.
- To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.
- Clean only with a soft, dry cloth.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
