RadioShack Soundbar Speaker User Manual
Model: 4001976
Specifications
- Output: 320 Watts
- Driver Units: 5.25" x 2 + 2.5" x 2 + 3" x 2
- Frequency Response: 60Hz-20KHz
- Separation: ≥45dB
- S/N: ≥60dB
- Distortion: ≤1% (1K, 1W)
- Power supply: 100-240V~, 60/50Hz
- Dimensions: Soundbar: W611 x H93x D126(mm), Subwoofer: W170 x H295(903) x D235(mm)
Features
- Quality Soundbar with built-in amplifier
- Full audio spectrum performances, ideal for your favourite entertainment like Mp3, Mp4, CD/DVD movies and digital playbacks.
- Quality materials: Only the best components to recreate sound faithfully across all frequencies.
Package Contents
- Soundbar: 1 pc
- Subwoofer: 2 pcs
- Remote control: 1 pc
- User manual: 1 pc
- Audio input cord: 1 pc
- Digital Optical Cable: 1 pc
- Stand for Subwoofer: 2 set
BT Pairing Method
Turn on the sound bar and press the "M" button on the panel or the "source" button on the remote to switch to Bluetooth mode. The LED display screen shows "bt" flashing, indicating the Bluetooth is in search pairing status. Turn on your Bluetooth device search, and select the Bluetooth name "4001976" to pair. When your Bluetooth device is successfully paired with the sound bar, a long light of the display screen "bt" indicates successful connection and music can be played. When playing music, you can use the previous/next track, play/pause functions on the sound bar panel. You can disconnect the currently connected Bluetooth device by long pressing the "|| " button on the remote or the sound bar panel.
Button Panel Operation
1. Power ON or Standby modes (press "/M" to select source, long press "/M" for standby). Toggle through input modes: "Bt" (Bluetooth), "USb" (USB), "AU" (AUX), "HD" (ARC), "OP" (Optical).
2. Volume Down (-)
3. Volume Up (+)
4. Play/Pause songs.
Remote Control Operation
- Power:
- TONE: Adjust TREBLE and BASS using VOL+/-.
- EQ: Select sound mode (NORMAL, CLASSIC, POP, ROCK, JAZZ).
- VOL+: Increase Volume.
- Previous Track: (not for AUDIO mode).
- Play/Pause/MUTE: Play/pause in USB/BT mode; MUTE in AUDIO mode.
- Next Track: (not for AUDIO mode).
- VOL-: Decrease Volume.
- BT: Select Bluetooth mode.
- ARC: Select ARC mode.
- OPT: Select OPTICAL mode.
- AUX: Select AUX input mode.
- USB: Select USB mode.
- MUTE: Turn volume off. Press again to unmute.
Rear Panel Connections (Soundbar)
- SW Out: Connect the Subwoofer speakers.
- AUX Input: Connect to sound sources like computer, CD player, MP3, etc.
- Optical Input
- USB Input
- ARC Input
- AC Power cord
System Connection Diagram
SB - Soundbar, SW - Subwoofer. Ensure proper placement of the soundbar and subwoofer for optimal listening position.
In Use Precautions
- ❌
- ❌
- If the remote control does not function, check and replace the battery.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
