Artika Alton PDT-AL5C-HD2BW LED Pendant Light

Important Safety Information

CAUTION: If using a dimmer, it must be LED compatible.

IMPORTANT: The installer and/or user must read, understand, and follow these instructions before installing the product. This product must be properly installed before it is used. Failure to follow installation and/or operating instructions voids the warranty. It is recommended that this product be installed by a certified electrician, as it may be a legal requirement in some regions.

WARNING: Risk of electrical shock. Turn off breaker at the panel. Switch off the main electrical supply from the fuse box/circuit breaker before installing the unit or doing any maintenance. Do not use outdoors.

Included Hardware

What You Will Need: Screwdriver (x1)

Installation Instructions

Step 1: Height Adjustment and Internal Wiring

Diagram Description: This step illustrates adjusting the suspension rod length and connecting the internal wiring. Wires (Red, White, Yellow) are shown extending from the light fixture and connecting to corresponding wires. Arrows indicate how to adjust the suspension rods for the desired height.

Actions:

• Connect the internal wires (Red to Red, White to White, Yellow to Yellow).
• Assemble and adjust the suspension rods (F) to achieve the desired fixture height.
• Feed the wires through the canopy (D).

Step 2: Mounting Bracket Installation

Diagram Description: This step shows the installation of the mounting bracket (A) to the electrical junction box. The bracket is secured using junction box screws (B).

Actions:

• Attach the mounting bracket (A) to the electrical junction box using the provided junction box screws (B).
• Ensure the bracket is securely fastened.

Step 3: Connecting the Wires and Canopy Installation

Diagram Description: This step details connecting the electrical wires and positioning the canopy. The ground wire (GND), black wire (L), and white wire (N) from the fixture are connected to the corresponding wires in the junction box using wire connectors (C). The canopy (D) is then placed over the electrical box.

Actions:

• Connect the ground wire (GND) from the fixture to the ground wire in the junction box.
• Connect the black wire (L) from the fixture to the hot wire (L) in the junction box.
• Connect the white wire (N) from the fixture to the neutral wire (N) in the junction box.
• Use wire connectors (C) to secure all connections.
• Carefully tuck wires into the junction box.
• Position the canopy (D) over the mounting bracket.

Step 4: Tunable White Technology

Diagram Description: This step highlights the Tunable White Technology feature. A close-up view shows a control mechanism (likely on the canopy or fixture) with a slider or dial allowing adjustment of the color temperature from 2700K (warm white) to 5000K (cool white). Arrows indicate the direction of adjustment. The text "PEEL OFF" is visible, likely referring to a protective film.

Functionality:

• Adjust the color temperature of the light using the integrated control.
• Select from preset temperatures: 2700K, 3000K, 3500K, 4000K, 5000K.

Step 5: Final Installation

Diagram Description: This is the final step where the canopy (D) is secured to the mounting bracket. Screws (E) are used to fasten the canopy in place, completing the installation of the light fixture.

Actions:

• Secure the canopy (D) to the mounting bracket using the canopy screws (E).
• Ensure the canopy is flush and securely attached.

Compliance Information

Canada (IC)

Operation is subject to the following two conditions: 1. This device does not cause interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

USA (FCC)

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device does not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warranty Information

Artika For Living Inc. offers a five-year (5) limited warranty on manufacturing defects from the date of purchase for residential use only. This warranty is extended to the original owner in the USA, Canada, Mexico, UK, Iceland, France, and Spain and is non-transferable. It does not apply to retailers, commercial applications, or establishments.

The original sales receipt is required for all warranty claims. The remedy under this limited warranty is product or part replacement at Artika's discretion, not to exceed the original purchase price.

This warranty is valid only on products installed in accordance with the building code and laws effective in the region where the unit is being used, and the provided instruction manual. It does not cover products installed incorrectly or subjected to abnormal use. Product(s) or component part(s) may be required to be returned for inspection and verification.

Normal wear and tear, misuse, negligence, vandalism, improper maintenance, improper handling, accidents, abuse, fire, flood, theft, acts of God, neglect, or alteration of the product are not covered. Accessories like bulbs or batteries are also excluded.

The warranty does not cover handling, labor, transportation, or other costs associated with installation or replacement. This limited warranty is valid only in the country of purchase and by Artika authorized retailers.

Artika For Living Inc. is not responsible for direct or consequential damages or injuries related to improper use or installation.

For more information, visit www.artika.com.

Contact Information

Artika For Living Inc.

1756, 50th Avenue
Montréal (Lachine), Québec
Canada H8T 2V5

Phone: 1-866-661-9606

Email: support@artika.com

Website: www.artika.com

Customer Service Hours: Monday to Friday, 9 am - 5 pm EST (9 h - 17 h H.N.E. / 9 a.m. - 5 p.m. hora del Este)