Artika Flint LED Pendant Light - Instruction Manual
Model: PDT-FL-BL10TE10-J
Brand: Artika
This manual provides essential instructions for the safe and proper installation and use of your Artika Flint LED pendant light.
Included Hardware
Item | Description | Quantity |
---|---|---|
A | Mounting bracket ? | 1 |
B | Junction box screw ? | 2 |
C | Wire connector ? | 3 |
D | Canopy screw ? | 2 + 1 extra |
E | Light LED pendant ? | 1 |
What you will need: Screwdriver ?️
Installation Guide
Step 1: Height Adjustment
Adjust the suspension wires to achieve the desired hanging height. To shorten the wire, retract it. To lengthen the wire, extend it by carefully rotating the adjustment mechanism.
[Diagram: Illustrates adjusting the pendant light's suspension wires to change its height.]
Step 2: Mounting Bracket Installation
Secure the mounting bracket (A) to the ceiling electrical junction box using the provided junction box screws (B).
[Diagram: Shows the mounting bracket being attached to a junction box with screws.]
Step 3: Connecting Wires and Canopy Installation
Connect the electrical wires: ground wire (GND) to ground, black wire (L) to live, and white wire (N) to neutral, using the wire connectors (C). Attach the fixture canopy (E) to the mounting bracket using the canopy screws (D).
[Diagram: Depicts the electrical connections being made with wire connectors and the canopy being affixed to the ceiling mount.]
Step 4: Tunable White Technology
This fixture features Tunable White Technology, allowing you to select your preferred color temperature from 3000K (warm white), 4000K (neutral white), or 5000K (cool white).
[Diagram: Shows indicators for selecting different color temperatures (3000K, 4000K, 5000K) on the fixture.]
Step 5: Final Installation
Complete the installation by firmly securing the canopy (E) to the ceiling using the canopy screws (D).
[Diagram: Illustrates the final step of securing the pendant light's canopy.]
Important Safety Information
Cautions
Caution: If using a dimmer switch, it must be specifically compatible with LED lighting to prevent damage or malfunction.
Warnings
Warning: Risk of electrical shock. ⚡ Always disconnect the main power supply from the circuit breaker or fuse box before beginning installation or performing any maintenance. This product is designed for indoor residential use only. ? ?
General Instructions
Read, understand, and follow all instructions before installing or operating this product. Failure to do so may result in product malfunction, void the warranty, and could be hazardous. For safety and compliance, it is recommended that this product be installed by a certified electrician, especially where local regulations require it.
Compliance Statements
Canada (IC)
Operation is subject to the following two conditions: 1. This device does not cause interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
USA (FCC)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device does not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are intended to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting the receiving antenna, increasing the separation between the equipment and the receiver, connecting the equipment to a different circuit, or consulting a dealer or experienced technician.
Warranty
Artika For Living Inc. provides a five-year (5) limited warranty against manufacturing defects for residential use, starting from the date of purchase. This warranty is valid for the original owner in the USA, Canada, Mexico, UK, Iceland, France, and Spain, and is non-transferable. It does not extend to retailers, commercial applications, or establishments. Proof of purchase (original sales receipt) is required for all warranty claims. Artika's sole responsibility is to replace the product or defective part at its discretion, not exceeding the original purchase price.
This warranty is void if the product is installed incorrectly, subjected to abnormal use, or if damage occurs due to normal wear and tear, misuse, negligence, vandalism, improper maintenance (including damage from chemical interaction or abrasive cleaning agents), improper handling, accidents, fire, flood, theft, acts of God, or product alterations. Accessories such as bulbs or batteries are not covered. Costs associated with handling, labor, or transportation for installation or replacement are also excluded.
For more details about Artika For Living Inc., please visit www.artika.com.