ACTIVESHOP Cassette Dust Collector MOMO J23

This document provides operating instructions and safety precautions for the ACTIVESHOP Cassette Dust Collector MOMO J23.

Technical Specifications

Notes

• The absorber filter is reusable. However, it's important to remember that filter pores can become clogged, reducing airflow and impairing the absorber's function. This can lead to excessive load on the fans and potential device failure.
• Regularly clean the filter and replace it with a new one when it becomes too worn.
• Do not use the device near a bathtub, sink, or other wet containers.
• When plugging in the device, do not touch its metal parts.
• Periodically clean the device to prevent the buildup of dirt, dust, and other undesirable substances. Accumulation of these materials can disrupt the device's operation or cause equipment failure.
• Do not wrap the power cord around the device, as this can damage the cord.
• Always ensure the device is powered by a suitable rated voltage source. Make sure the plug is correctly inserted into the electrical socket. Failure to do so may result in fire, electric shock, or burns.
• Do not connect or disconnect the device from the outlet with wet or damp hands.
• Do not use the device under the following conditions:
  • If the cord or plug is hot or damaged;
  • If the plug is loose in the socket;
• The cord must not be modified, stretched, excessively bent, or twisted.
• Do not place heavy objects on the cord.
• Ensure that dust or other harmful elements do not enter the plug.
• Do not use or store the device in a bathroom or other rooms with high humidity. This can cause electric shock, fire, or damage to the insulation.
• Do not allow children to use the device.
• Do not use the device near flammable materials, such as: alcohols, solvents, gasoline, aerosol sprays, etc. This can cause an explosion or fire.
• The device must not be hit or thrown. If the device is damaged due to impact or dropping, it must not be used further.
• Do not attempt to disassemble or repair the device. For repairs, contact the distributor from whom you purchased the device or an authorized service center.

ATTENTION!!! If you use a power source with a voltage other than 12V, the absorber will function incorrectly or may be damaged.

Usage Instructions

If the absorber does not turn on or operates intermittently (the fan turns on and stops), ensure the power source voltage is correct (12V 3A).

1. Insert the filter into the container.
2. Place the device on a flat and stable surface.
3. Connect the power plug to a suitable power source.
4. Turn on the device using the power switch and enjoy smooth operation, remembering to clean the filter regularly.

Safety Precautions

1. The device is professional equipment intended for use in beauty salons. Using the device only by qualified cosmetic personnel avoids undesirable consequences during procedures.
2. The device must not be disassembled or attempted to be used for purposes other than those specified in this user manual. All service and repair work must be performed only by an authorized service specialist (ACTIVESHOP Sp. z o.o. company).
3. Do not install or use the device near liquids, in damp places, or with wet hands to prevent liquids from entering the device.
4. In the following cases, immediately unplug the device from the electrical outlet and contact an ACTIVESHOP Ltd. authorized service center:
   • (a) liquid has entered the device,
   • (b) the device emits a strange odor, smoke, or unusual noises,
   • (c) the power cord is damaged,
   • (d) the device has been tipped over or its casing is damaged.
5. Do not place any objects on the cords. Do not place the device where someone might step on the power cord.
6. For safety reasons, unplug the power cord from the electrical outlet every time you finish working with the device.
7. Do not insert anything into the device's openings. If a foreign object enters an opening, unplug the cord and contact the distributor or manufacturer.
8. Do not place the device on an unstable trolley, shelf, or transport vehicle. Dropping the device can cause damage.
9. To ensure a fixed service life, it is recommended to maintain a one-minute interval before pressing the power button again (between turning on and off, and vice versa).
10. The power source must comply with the specifications indicated on the nameplate. Otherwise, there is a risk that the device may malfunction, be damaged, or even burn out.

ATTENTION

1. If the power cord is damaged or other malfunctions occur, contact an authorized service center to avoid danger.
2. This device can be used by children aged 8 and above, and persons with reduced physical or mental capabilities, lacking experience and knowledge, if they are supervised or instructed on how to use the equipment safely and understand the associated risks.
3. The equipment is not intended for children to play with. Do not let children play with the device.
4. Do not leave the device unattended when children or persons unfamiliar with its operation are nearby.
5. This electrical device is not a toy. Improper use or contact with the electrical device can pose a health risk or cause death, so the device must be used and stored out of reach of children.

DEVICE DISPOSAL

Dispose of used electrical appliances, fixtures, and packaging at recycling centers, adhering to environmental protection principles. Electrical appliances must not be disposed of in household waste containers. Follow the disposal rules for this type of equipment. To protect the environment, according to Directive 2012/19/EU on waste electrical and electronic equipment, used electrical and electronic equipment must be collected separately and handed over to collection points for used electronic and electrical equipment.

Unused and old appliances contain fully recyclable components and should therefore be returned for recycling. They should be handed over to appropriate collection points, as well as to the company ACTIVESHOP Ltd.

STORAGE AND TRANSPORTATION

The device should be transported between (-) 20 °C and (+) 50 °C only in its original packaging. Store the device in a well-ventilated room with relative air humidity not exceeding 75%. Operating temperature from (+) 10 °C to (+) 40 °C. During storage and transportation, the device must not be thrown or dropped, and must not be subjected to mechanical shocks or atmospheric influences.